Which Delhi venues do you work at?

Bharat Mandapam (Around 7,000 in the plenary hall with multiple halls across the ITPO complex); Yashobhoomi (Around 11,000 in the main auditorium plus very large convention and exhibition halls); JLN Stadium (Around 60,000 in the bowl, with the infield used for staged events). Everything goes through the ITPO process — gate passes, approved-vendor paperwork and security screening of every case — so the build calendar has to start 72 hours before a build that would take one night anywhere else. We also cover hotels, farmhouses and open grounds across Connaught Place, Aerocity, Chattarpur, Vasant Kunj, Dwarka, Saket.

How many lumens does my building need?

It depends on surface area, material reflectance and ambient light, not on size alone. As a planning figure we budget roughly 250 to 400 lumens per square metre of lit surface for a reasonably dark site on light stone, which puts a 400 square metre façade at 100,000 lumens or more. Dark granite and nearby street lighting both push that figure up sharply.

How long does the content take to produce?

Five to seven weeks for a three to five minute façade show, from storyboard through animatic to final render with sound design. The clock cannot start until the projector study is signed off, because the animation is authored onto the specific geometry and camera positions, so an early survey is what protects the schedule.

Can you map onto a heritage monument?

Technically yes, and we do. Practically it requires permission from the site authority, a no-touch approach where nothing is fixed to the structure, projectors positioned on ballasted free-standing towers, and usually restrictions on show hours and sound level. That permission file is the long lead item, not the content.

Why does alignment have to happen at night?

Because you cannot see the projected image well enough to warp it in daylight. A multi-projector façade takes four to eight hours of night work to warp, blend and mask properly, which is why we ask for two nights before the technical rehearsal rather than one.

Spectacle · Delhi, Delhi NCR

3D Projection Mapping in Delhi

Delhi's event economy runs on policy and procurement: ministries, PSUs, embassies, industry bodies like CII and FICCI, and the exhibition calendar at Pragati Maidan and Dwarka. Alongside that sits the farmhouse wedding belt from Chattarpur to Mehrauli, where single families commission production budgets that rival a mid-size corporate conference. Prime AV Solutions supplies the 3D projection mapping behind those events — designed on paper, proven in rehearsal and run by our own crew.

WhatsApp a producer

Rated 4.9/5 by 600+ event planners and brands

Lead time: From 10 weeks
Peak season: Oct–Mar
Coverage: Delhi & Delhi NCR

Key takeaway

3D Projection Mapping in Delhi is quoted against your guest count, venue and run of show. The deepest supplier pool in the country sits here, which makes Delhi the cheapest place in India to hire kit — a comparable conference rig quotes well below its Mumbai equivalent — and clients negotiate accordingly. The margin lives in engineering, crew quality and compliance paperwork, not in equipment day rates. India International Trade Fair at Pragati Maidan through the second half of November absorbs every truss section, rigger and forklift in the NCR. Republic Day locks central Delhi for most of January with rehearsal closures from early in the month, state visits close roads without notice, Diwali week empties the labour pool, and the November-December and February muhurat clusters book out the farmhouse belt a year ahead — so we quote within 24 hours and hold dates first-come.

3D Projection Mapping for Delhi’s biggest events

Projection mapping starts with a survey, not a storyboard. We photogrammetry-scan or LiDAR-measure the surface — a façade, a stage set, a car, a cake — and build a 3D model that matches the real object within a few centimetres. The projectors are then positioned virtually against that model to check throw ratio, keystone, shadowing from balconies or trees, and whether any part of the surface falls outside the beam. Only once the projector positions are fixed does content production begin, because a mapped animation is authored against a specific camera position and cannot simply be moved later.

The surface is the instrument here — its material, reflectance, depth and the audience's viewing axis decide projector count, angles and whether the illusion reads at all. In Delhi that plays out at venues like Bharat Mandapam, Yashobhoomi, JLN Stadium, and across Connaught Place, Aerocity, Chattarpur, Vasant Kunj.

Brightness is the engineering constraint that decides the budget. Perceived image brightness depends on lumens, surface area, the reflectance of the material and the ambient light falling on it. Stone and painted plaster reflect perhaps 20 to 35 per cent of what hits them; dark stone far less. A heritage façade of 400 square metres with street lighting nearby can need 100,000 lumens or more in total, which is three or four stacked 30K-class laser projectors per angle. Laser phosphor sources are the standard now because they hold brightness and colour across a run, start instantly and tolerate the dust and heat of an outdoor build far better than lamps.

What’s included

20K–40K lumen laser projectors
Custom 3D content & storyboards
Edge blending & warping (Pixera, Disguise)
Heritage façades, cars, cakes & stages

Equipment we carry

BarcoChristiePanasonicEpsondisguiseAV Stumpfl PixeraDataton WatchoutResolume

Why Delhi chooses Prime AV

Crews and trucks positioned for fast load-in at Bharat Mandapam and venues in Saket and Rajouri Garden.
Content production does not begin until the projector study is signed off, because the mapping is authored against those exact camera positions.
3D geometry model of the mapped surface with the UV layout
Working knowledge of Delhi NCR venue rules, power sanctions and permission timelines.

Local conditions

Producing 3D projection mapping in Delhi

Weather & the rig

Mapping is defeated by air as much as by rain — haze, dust and humidity scatter the beam and soften a blend, so brightness headroom is specified against local conditions. Two distinct problems bracket the season. From mid-December through January, radiation fog drops visibility under 100m and turns projection milky at any useful throw, while 3–5°C call times slow LCD response on monitors and stress LED driver boards before the first cue. Then from late October the post-harvest smoke layer pushes AQI past 400, which hazes beams attractively to the eye and reads as dirty grey on camera, so broadcast-led shows have to light for the haze rather than through it. May and June bring 45°C and loo winds that load filters within a session. Jul–Sep monsoon, where the real hazard is not rainfall volume but the short violent pre-rain squall that arrives in ten minutes and takes down an untethered outdoor structure; mid-Dec to late Jan if the design depends on projection throw.

Power & redundancy

Stacked 30K-class projectors each draw several kilowatts continuously for the whole run, so projection needs a dedicated, stable, uninterrupted supply rather than a share of the event distribution. NDMC, BSES and Tata Power supply in Lutyens, Aerocity and Dwarka is strong enough to run a conference on house power. The farmhouse belt is the opposite: Chattarpur and Mehrauli events are DG-primary, typically a synchronised pair of 250 kVA silent sets with auto-changeover. The complication unique to Delhi is GRAP — once the Commission for Air Quality Management escalates to the higher stages in winter, diesel generator use is curtailed unless the set is retrofitted or dual-fuel, so a December outdoor show needs its power strategy approved before the stage design is signed.

Permits & noise rules

Mapping a building means permission to light it, towers on public or heritage ground, and usually a negotiated blackout of nearby street lighting for the show window. Amplified sound and temporary-structure NOCs route through the Delhi Police Licensing Branch, with ground permission from MCD, NDMC or DDA depending on whose land it is, and a Delhi Fire Service NOC for any pandal or raised structure. DPCC applies the noise rules and the 10pm loudspeaker cut-off. Drone operation is close to impossible on a normal timeline: most of the city falls inside the IGI red zone or a VVIP restriction, and anything beyond that needs clearance that goes well past a Digital Sky permission.

Load-in & access

Projector towers, ballast and enclosures have to be placed on a precise viewing axis that is often a road or a public plaza, so access and closures drive the build plan. Goods-vehicle restrictions keep trucks out of much of the city through the day, so inventory moves from Okhla, Noida or Gurugram warehousing after 11pm. Pragati Maidan is easier since the tunnel opened, but ITPO gate passes have to be lodged days ahead. Yashobhoomi has purpose-built docks. The genuine trap is the farmhouse circuit, where a single narrow gate is shared with guest arrival, so load-in must be finished and the gate cleared before the first car turns in.

Season & booking

India International Trade Fair at Pragati Maidan through the second half of November absorbs every truss section, rigger and forklift in the NCR. Republic Day locks central Delhi for most of January with rehearsal closures from early in the month, state visits close roads without notice, Diwali week empties the labour pool, and the November-December and February muhurat clusters book out the farmhouse belt a year ahead. Peak demand runs Oct–Mar.

Crew & dispatch

Own NCR base with warehousing across Okhla, Noida and Gurugram, which also makes Delhi the dispatch origin for Jaipur, Agra, Lucknow, Gwalior, Ludhiana and Amritsar. Load-in support covers Saket, Rajouri Garden and the rest of the city.

What it costs here

The deepest supplier pool in the country sits here, which makes Delhi the cheapest place in India to hire kit — a comparable conference rig quotes well below its Mumbai equivalent — and clients negotiate accordingly. The margin lives in engineering, crew quality and compliance paperwork, not in equipment day rates.

Local expectations

Protocol is the deliverable at government and diplomatic events: dais seating order, the lamp-lighting sequence, anthem cues, correct honorifics in the script and a VIP arrival time that will move by forty minutes without warning. Bilingual Hindi and English scripting is assumed, as is a clean press feed. Punjabi weddings here expect high SPL and a finish past the curfew, which is why experienced producers push those clients towards acoustically contained indoor venues rather than fighting the enforcement.

Specification

3D Projection Mapping: technical specification

Typical 3D projection mapping specification supplied in Delhi.
Specification	Detail
Projector class	20,000 – 40,000 ANSI lumens, laser phosphor or RGB laser, 3-chip DLP
Surface reflectance assumption	20 – 35 per cent for stone and painted plaster, lower for dark granite
Typical façade budget	Approximately 250 – 400 lumens per square metre of lit surface, ambient dependent
Blend overlap	10 – 20 per cent soft-edge between adjacent projectors
Media servers	disguise gx/vx, AV Stumpfl Pixera, Dataton Watchout
Survey method	Photogrammetry or LiDAR scan to a 3D model accurate within a few centimetres
Alignment window	Night-time only, four to eight hours for a multi-projector façade
Content pipeline	Cinema 4D or Blender to UV-mapped render, delivered as image sequence
Show length	3 – 12 minutes, usually looped with timecoded audio
Weather protection	IP-rated projector enclosures with filtered forced-air cooling for outdoor runs

On site, the work is warping, blending and masking. Each projector's output is warped onto the surface geometry using a media server — disguise, Pixera or Watchout — with overlap regions of 10 to 20 per cent soft-edge blended so no seam is visible. Masks cut the beam off windows, balconies and anything that must stay dark. Alignment is done at night with the actual content and takes hours, not minutes, and it must be re-checked if a projector is bumped or a tower settles. We lock projector positions with ballasted towers and mark every position so a knocked unit can be returned to alignment rather than re-mapped.

Sizing

What size rig does your event actually need?

Scale	Guests	Recommended setup
Single object	50 – 300	One object, 2 x 20K projectors, 10 – 30 sq m, 60 – 90 seconds of content
Stage set	300 – 1,500	Set faces plus floor, 4 x 20K, 50 – 120 sq m, blended and masked to scenic edges
Hotel façade	500 – 2,000	6 x 30K from two angles, 250 – 400 sq m, three-minute show, ballasted towers
Palace or fort wall	2,000 – 10,000	10 – 14 x 30K from three angles, 500 – 800 sq m, five-minute narrative, multi-night
Monument spectacle	10,000+	20+ projectors, 1,000 sq m+, redundant servers, nightly alignment, licensed site

Scope

3D Projection Mapping scope tiers in Delhi

Object & Stage Mapping

Product reveals, car launches, cakes and set pieces up to 60 sq m

3D scan of the object and a matched virtual projector study
Two to four 20K-class projectors with blending and masking
60 to 120 seconds of bespoke animation to the reveal beat
Pixera or Watchout playback with timecoded audio
Mapping technician, media server operator and a content artist

Most booked

Façade Show

Heritage buildings, hotel and palace façades, 200 – 600 sq m

Photogrammetry survey and full geometry model of the building
Six to twelve 30K-class laser projectors on ballasted towers
Three to six minutes of custom 3D content with sound design
Night alignment across multiple sessions with masking of windows
Projection crew, riggers, server operator and content studio time

Large-Scale Spectacle

City festivals, monuments and multi-surface installations, 800 sq m and above

Multi-angle design covering several surfaces as one canvas
Twenty-plus projectors with redundant servers and hot spares
Full narrative content production with score and voiceover
Weather-rated enclosures and a multi-night run with nightly re-alignment
Full crew across survey, build, alignment, show run and strike

Venues

Where we work in Delhi

Venue	Capacity	Production note
Bharat Mandapam	Around 7,000 in the plenary hall with multiple halls across the ITPO complex	Everything goes through the ITPO process — gate passes, approved-vendor paperwork and security screening of every case — so the build calendar has to start 72 hours before a build that would take one night anywhere else.
Yashobhoomi	Around 11,000 in the main auditorium plus very large convention and exhibition halls	The sheer footprint is the constraint: control positions end up a long way from stage, so fibre and signal distribution rather than copper multicore decides whether the design works.
JLN Stadium	Around 60,000 in the bowl, with the infield used for staged events	SAI holds the approvals, the athletics track and infield need full protection boarding, and the roof carries no event rigging at all, so even a modest stage needs ground-support towers with ballast calculations.
Siri Fort Auditorium	Around 1,200 seated	A fixed proscenium house with house rigging and a locked projection throw, so any design that wants a different screen position has to solve it with ground support in the wings.
Chattarpur farmhouse venues	Typically 1,000–5,000 across lawns and covered structures	Driveways are gravel or kutcha and will not take a loaded trailer without ground-protection boards, and almost every one of them is generated end to end with no usable house feed.

Crew

Who turns up on show day

Mapping technician
Builds the geometry model, warps each projector to the surface and maintains alignment across the run.
Media server operator
Runs disguise, Pixera or Watchout, holds the show timeline to timecode and keeps a mirrored backup server.
Content artist
Authors the animation against the UV-mapped geometry so it reads correctly from the audience viewing position.
Projector technician
Rigs, powers, focuses and cools each unit, monitors lamp or laser hours and swaps a failed unit without losing alignment.
Rigger
Builds and ballasts the projector towers, secures positions against wind and marks them for repeatable realignment.

What you receive

3D geometry model of the mapped surface with the UV layout
Projector placement study with throw, brightness and coverage calculations
Master render of the show content at delivery resolution
Media server show file with timecode cues and a mirrored backup
Masking map showing every excluded window, balcony and dark zone
Audio stem and mixed show track used for synchronisation
Full-length video capture of the show as performed from the audience position

Timeline

From enquiry to load-out

T-10 weeks
Site survey and scan
Photogrammetry or LiDAR capture of the surface, plus ambient light readings taken at the intended show hour.
T-8 weeks
Projector study and sign-off
Virtual projector placement, brightness calculation and tower positions agreed with the venue and the authority.
T-7 to T-2 weeks
Content production
Storyboard, animatic review, then full 3D render against the UV map with sound design and score.
Show day −3 to −2
Build and first alignment
Towers built and ballasted, projectors rigged, first night of warping, blending and masking.
Show day −1
Technical rehearsal
Full show run at the actual hour, content reviewed from the audience position, and corrections rendered overnight.
Show day to +2 days
Show run and strike
Nightly runs with a pre-show alignment check, then strike with projectors cased and towers de-ballasted.

Risk control

What goes wrong, and how we stop it

What can go wrong

How we prevent it

What can go wrong
Content is authored before projector positions are fixed, so the animation does not sit on the geometry.
How we prevent it
Content production does not begin until the projector study is signed off, because the mapping is authored against those exact camera positions.
What can go wrong
A projector tower settles overnight in soft ground and the whole blend is out by morning.
How we prevent it
Towers are built on load-spreading base plates, ballasted, and positions are physically marked so a realignment check before each show takes minutes.
What can go wrong
Dust and heat in an outdoor enclosure cause thermal shutdown mid-show.
How we prevent it
IP-rated enclosures with filtered forced-air cooling, filters changed daily on a multi-night run, and internal temperature logged during rehearsal.
What can go wrong
Brightness is calculated from lumens alone and the dark stone façade swallows the image.
How we prevent it
The calculation includes measured surface reflectance, not an assumed figure, and a test projection on the actual material is done at survey wherever access allows.

Honest comparison

Is this the right choice for your event?

Stock content instead of bespoke animation
Our verdict
Stock loops and generative visuals genuinely work for ambient architectural washes and for leaner budgets. They cannot do a reveal, a narrative or anything that respects the building's actual architecture, because they are not authored to your geometry.
Fewer, brighter projectors instead of more units
Our verdict
Fewer angles means fewer blends and a faster alignment, which is the right trade on a flat surface. Any building with depth, recesses or wings needs multiple angles regardless of total lumens, or the recesses stay dark.
Architectural lighting instead of mapping
Our verdict
For a façade that only needs to look beautiful, uplighting and colour washes cost a fraction, go up in a day and work in light rain. Mapping is for when the building has to perform rather than just glow.

Demand

What Delhi books most

Delhi event mix

Government, ministry and multilateral summits
Trade exhibitions and industry association conventions
Large farmhouse and hotel weddings
Corporate conferences, dealer meets and award nights
Product launches and auto reveals
Political rallies and public functions

Ideal for

Events we power with 3D projection mapping in Delhi

Product launches

Wedding façades

Brand & city festivals

Process

From brief to standing ovation

Brief & recce

We visit the venue, map power and rigging, and understand your show flow.

Design & quote

CAD plans, 3D previews and an itemised quote within 24 hours.

Build & rehearse

Load-in, system tuning, content checks and full technical rehearsal.

Show & strike

Show-caller-led execution, then a quick, clean load-out.

FAQ