Sound
Wedding Sound & Lighting across India
Seamless AV for sangeet, mehendi, pheras and reception — discreet speakers, warm architectural lighting and LED backdrops matched to your decor.
- Lead time
- T-8 weeks
- Category
- Sound
- Coverage
- 90+ Indian cities
Key takeaway
How we deliver wedding sound & lighting
A wedding is not one event; it is four or five productions sharing a site and a crew. Mehendi wants soft daytime coverage and a live dholak that will not feed back. Sangeet needs performance-grade sound, a dance-floor rig and a cue stack that follows rehearsed choreography. The pheras demand near-silence from the system beyond gentle reinforcement of the mantras, and the reception needs speech intelligibility at conversational volume plus a band or DJ afterwards. We design each function as its own zone plan, then sequence the changeovers so the crew is never rebuilding a system while guests are in the room.
Speech is the part most often lost. Vows, speeches and the pandit's recitation sit at 65 to 75 dBA and compete with open-air ambience, clattering service and a decor team that hates visible speakers. The answer is distribution rather than volume: small cabinets on slim stands or hidden in decor every 10 to 15 metres, delayed to the source so the sound arrives coherently, with lavalier and headset microphones on separate coordinated frequencies and a technician holding a spare handheld within arm's reach of the mandap. Low frequency is deliberately restrained during ceremony so the system never muddies consonants.
Lighting on a wedding is architectural before it is theatrical. Battery or cabled uplighters on 3-metre centres wash drapes and walls in the palette the decorator has chosen; pixel-mapped tape and tubes carry the sangeet's beat; warm-white pin spots pick out the mandap, the cake and the entrance walkway so that photography and video have something to work with. Everything is colour-matched to one reference white point, typically around 3,000 K for warm functions, because a stage lit at 3,200 K beside decor lit at 5,600 K looks wrong in every photograph regardless of how good either looks alone.
What you get
- Separate setups per function with fast changeovers
- Pixel-mapped decor lighting
- Wireless mics for vows & speeches
- LED walls for visuals & live feed
Equipment we carry
Ideal for
Specification
Wedding Sound & Lighting: technical specification
| Specification | Detail |
|---|---|
| Function zones | Separate designs for mehendi, sangeet, pheras, reception and after-party |
| Speech target level | 65 – 75 dBA at the guest position, distributed not centralised |
| Distributed fill spacing | One cabinet every 10 – 15 m, time-aligned to the primary source |
| Dance-floor SPL | 95 – 100 dBA for sangeet, 100 – 105 dBA for the after-party |
| Uplighter spacing | 3 m centres along drapes and perimeter walls |
| Colour reference | Single white point per function, typically 2,700 – 3,200 K for warm looks |
| Microphones | Lavalier, headset and handheld on coordinated UHF frequencies plus a held spare |
| Changeover window | 90 – 180 minutes between functions on a shared site |
| LED backdrop | P2.6 – P3.9 indoor, P4.8 outdoor, with live camera feed input |
Sizing
What size rig does your event actually need?
| Scale | Guests | Recommended setup |
|---|---|---|
| Intimate lawn | 100 – 250 | Two compact tops per side, one sub, two distributed fills, 16 uplighters, four pin spots |
| Banquet hall | 250 – 600 | Four tops per side, two subs, four delayed fills, 32 uplighters, 12 moving heads, 3 m LED backdrop |
| Hotel lawn | 600 – 1,200 | Compact array per side, four subs, six distributed fills, 60 uplighters, 24 fixtures, 6 m LED wall |
| Palace or fort | 800 – 1,500 | Zoned systems per courtyard, façade wash, battery fixtures where cabling is restricted, generator-fed |
| Multi-venue resort | 1,000 – 2,000+ | Duplicate rigs per venue, central control, 100+ uplighters, two LED walls, full travelling crew |
Scope
Wedding Sound & Lighting scope tiers
Single Function
One evening — sangeet or reception — for 200 to 500 guests
- Compact PA with distributed fills and four wireless microphones
- Twenty-four uplighters colour-matched to the decor palette
- Eight moving heads over the stage and dance floor
- A 3 m x 2 m LED backdrop with content playback
- Sound engineer, lighting operator and one technician
Full Wedding Weekend
Three to four functions across two or three days, 400 – 1,000 guests
- Separate zone designs per function with rehearsed changeovers
- Pixel-mapped decor lighting plus pin spots on mandap, cake and entry
- Sangeet performance rig with monitors and IEM channels
- LED wall with live IMAG feed from two cameras
- Full-time crew across all functions including a show caller
Destination Production
Palace, resort and overseas weddings, 600 – 2,000 guests
- Multi-venue design across lawn, ballroom and poolside builds
- Duplicate systems so no function waits for a de-rig
- Architectural façade lighting and perimeter landscape wash
- Weatherised outdoor rig with covered racks and tented FOH
- Travelling crew, local labour coordination and spares inventory
Crew
Who turns up on show day
- Show caller
Runs the order of events against the family's timeline, cues entries and keeps sound, lighting and video in step.
- Sound engineer
Mixes speech, live musicians and performances, and holds the ceremony level low enough to stay transparent.
- Lighting programmer
Builds and runs the cue stack for entries, performances and the first dance, and colour-matches to decor samples.
- Microphone technician
Fits and checks lavaliers and headsets, stays within reach of the mandap, and swaps a failing pack silently.
- Changeover crew lead
Owns the clock between functions — strike, rebuild, test and clear before guests return.
What you receive
- Zone plan and speaker placement drawing per function
- Lighting plot with colour references matched to decor samples
- Microphone allocation chart naming who wears which pack
- Order-of-events cue sheet shared with the planner and the family
- LED content playlist and backup on two drives
- Power requirement schedule and generator load sheet
- Rehearsal notes and the final running order as actually run
Timeline
From enquiry to load-out
- T-8 weeks
Design and decor alignment
We take the decorator's palette, drape plan and mandap design and build the lighting and speaker placement around them.
- T-4 weeks
Function-by-function plan
Zone plans, microphone counts, changeover sequence and power requirement issued per function.
- T-2 weeks
Content and cue build
LED content, entry tracks, performance audio and the lighting cue stack are assembled and reviewed with the family.
- Show day −1
Rehearsal
Performers rehearse with full sound and lighting, entries are walked, and every microphone is checked on the actual stage.
- Day 1 to Day 3
Function days
Crew works each function live, with changeovers timed against the published guest schedule.
- Final function +4 hours
Strike
De-rig in venue-mandated order, with decor-integrated fixtures removed carefully alongside the decor team.
Risk control
What goes wrong, and how we stop it
What can go wrong
How we prevent it
- What can go wrong
The pandit's recitation is inaudible past the third row because decor blocked every sensible speaker position.
How we prevent itSpeaker positions are agreed with the decorator at the drawing stage, and we carry slim-column cabinets and decor-matched finishes for the places a box cannot be seen.
- What can go wrong
A lavalier pack fails mid-vows and the moment cannot be re-run.
How we prevent itTwo packs on the officiant and the couple where possible, a technician within arm's reach, and a dressed handheld already live on a held frequency.
- What can go wrong
Stage lighting at 3,200 K beside decor lighting at 5,600 K ruins every photograph.
How we prevent itOne white point per function agreed with the photographer and videographer, and all fixtures colour-calibrated to it at focus.
- What can go wrong
The changeover between pheras and reception overruns and guests walk into a half-built room.
How we prevent itChangeovers are rehearsed as a timed drill, and anything that cannot be struck in the window is duplicated rather than moved.
- What can go wrong
An evening shower on a lawn build takes out uplighters and a stage-left amplifier rack.
How we prevent itIP-rated battery fixtures on decor positions, racks on raised deck under hard cover, and a canopy plan that goes up on a forecast rather than on a drop.
- What can go wrong
Dance-floor volume at the sangeet drives older guests out of the room entirely.
How we prevent itZoned levels with the dance floor hot and the dining area 12 to 15 dB quieter, achieved with directional boxes rather than a single master fader.
Honest comparison
Is this the right choice for your event?
- One large central PA instead of distributed fillsOur verdict
A central system is cheaper and simpler, and fine for a compact hall. On a long lawn it forces you to make the front painfully loud to reach the back, which is precisely the complaint most wedding guests have.
- Fabric and floral backdrop instead of an LED wallOur verdict
For a traditional palette a well-built floral backdrop photographs better and costs less. LED earns its place when you want live IMAG of the entries, montage films, or looks that change between functions.
- Decorator-supplied lighting instead of a lighting designerOur verdict
Decorators do beautiful static looks and often include uplighting in their package. If nothing needs to change on a cue, take it. The moment there are entries, performances and a first dance, you need a programmer and a cue stack.
- Reusing one rig across all functions instead of duplicatingOur verdict
Reuse is the right call when functions are a day apart. When two functions are six hours apart in different parts of the property, duplication costs less than the overtime, the risk and the guests watching a de-rig.
Process
How we deliver
01
Brief & recce
We visit the venue, map power and rigging, and understand your show flow.
02
Design & quote
CAD plans, 3D previews and an itemised quote within 24 hours.
03
Build & rehearse
Load-in, system tuning, content checks and full technical rehearsal.
04
Show & strike
Show-caller-led execution, then a quick, clean load-out.
Locations
Wedding Sound & Lighting by city
Tier 1 metros
Tier 2 cities
FAQ