Conference & Broadcast
Simultaneous Interpretation Systems across India
ISO-standard interpretation booths, infrared receivers and multi-language channels for international summits and government delegations.
- Lead time
- T-8 weeks
- Category
- Conference & Broadcast
- Coverage
- 90+ Indian cities
Key takeaway
How we deliver simultaneous interpretation systems
Interpretation is a standards-driven discipline, and the standards exist because interpreters working in bad conditions make mistakes. Mobile booths are built to ISO 4043, which specifies a working space of roughly 1.6 by 1.6 by 2.0 metres for two interpreters, sound insulation from the floor and from adjacent booths, forced ventilation with a defined air change rate that is quiet enough not to intrude on the microphone, and a full-width front window with unobstructed sight of the speaker, the screen and the delegates. Permanently installed booths follow ISO 2603, and the equipment itself — consoles, headphones, microphones — follows ISO 20109. Where a client asks us to put interpreters in a curtained corner, we decline, because sightline and sound isolation are not optional extras.
Distribution to delegates is almost always infrared on a Bosch Integrus or equivalent system, for one reason that matters more than audio quality: infrared does not pass through walls, so a confidential session cannot be received from the corridor. Radiators are placed to cover the seating area with line of sight to every receiver, and coverage is calculated from radiator power against the room area, with careful attention to shadowing behind pillars, under balconies and in deep seating. Channel planning allocates one channel per target language plus the floor language, and the carrier frequencies are chosen to avoid interference from certain LED and plasma lighting that radiates in the infrared band.
The operational layer is the part clients underestimate. Interpreters work in pairs per booth and swap roughly every twenty to thirty minutes, because sustained simultaneous interpretation is cognitively unsustainable beyond that — a single interpreter per language is a false economy that degrades the session. They need the speaker's slides and script in advance, a clean direct audio feed from the console rather than a room microphone, and a technician who can patch relay interpretation when a language pair has no direct interpreter. Receivers are issued against delegate identification, counted back, charged overnight and sanitised between sessions, which is a logistics job in its own right at scale.
What you get
- ISO 4043 booths
- Bosch Integrus IR systems
- Up to 16 language channels
- Interpreter sourcing on request
Equipment we carry
Ideal for
Specification
Simultaneous Interpretation Systems: technical specification
| Specification | Detail |
|---|---|
| Mobile booth standard | ISO 4043: approximately 1.6 x 1.6 x 2.0 m for two interpreters, insulated and ventilated |
| Built-in booth standard | ISO 2603 for permanently installed booths |
| Equipment standard | ISO 20109 for interpreter consoles, microphones and headphones |
| Distribution | Bosch Integrus infrared, confidential because it does not pass through walls |
| Channel capacity | Up to 16 language channels plus the floor channel on a typical deployment |
| Radiator coverage | Calculated from radiator power against floor area with line of sight to every seat |
| Interpreter staffing | Two interpreters per booth per language, swapping every 20 – 30 minutes |
| Audio feed | Clean direct feed from the console to each booth, never a room microphone |
| Relay interpretation | Pivot language routing where no direct language pair is available |
| Receiver logistics | Issued against delegate ID, counted back, charged overnight and sanitised between sessions |
Sizing
What size rig does your event actually need?
| Scale | Guests | Recommended setup |
|---|---|---|
| Bilateral meeting | 20 – 80 | One booth, two channels, 80 receivers, one radiator, single technician |
| Seminar | 100 – 300 | Two booths, three channels, 300 receivers, two to three radiators, receiver desk |
| Conference hall | 300 – 800 | Four booths, five channels, 800 receivers, four to six radiators with shadow mapping |
| Summit plenary | 800 – 1,500 | Six to eight booths, eight channels, 1,500 receivers, radiator grid plus balcony coverage |
| Multilateral meeting | 1,500+ | Up to sixteen channels, multi-room booths, shared interpreter pool, per-channel recording |
Scope
Interpretation Equipment scope tiers
Two-Language Session
Single-day bilateral meetings and pharma sessions up to 200 delegates
- One ISO 4043 booth with two interpreter consoles
- Two language channels plus floor on infrared distribution
- Two hundred receivers with issue, return and overnight charging
- Clean console feed to the booth and a technician throughout
- Radiator coverage check across the full seating area
Multilingual Summit
International summits and conferences, 300 – 1,000 delegates, four to eight languages
- Four to eight ISO 4043 booths with full isolation and sightline positioning
- Eight-channel infrared with shadow-free radiator placement
- Relay routing configured for language pairs without direct interpreters
- Interpreter briefing pack: agenda, slides, scripts and glossary
- Receiver desk crew plus a dedicated interpretation technician
Delegation Conference
Government and multilateral meetings, 1,000+ delegates, up to 16 languages
- Up to sixteen channels across multiple rooms with a shared interpreter pool
- Booth sound-isolation verification and ventilation noise measurement
- Multi-room receiver logistics with per-session reconciliation
- Per-channel recording of every language output for the record
- Interpreter sourcing coordination and on-site interpretation manager
Crew
Who turns up on show day
- Interpretation technician
Builds and tests booths, consoles and radiators, verifies every channel and relay path, and sits within reach of the booths all session.
- Audio engineer
Provides the clean direct feed to every booth and keeps floor audio free of the room reverberation that makes interpreting exhausting.
- Receiver desk crew
Issues receivers against delegate identification, reconciles the count at every break and manages charging and sanitisation.
- Interpretation manager
Coordinates interpreter rotation, distributes briefing packs and handles the on-the-day language changes that always arrive.
- Booth builder
Assembles and positions booths for sightline to speaker and screen, and verifies isolation and ventilation noise before interpreters arrive.
What you receive
- Booth layout drawing showing sightlines to speaker and screen
- Radiator coverage plan with shadowed areas identified and resolved
- Channel allocation map including every relay routing path
- Interpreter briefing pack as distributed, with the technical glossary
- Receiver issue and reconciliation log per session
- Per-channel recording of each language output where required
- Channel test and booth isolation verification record
Timeline
From enquiry to load-out
- T-8 weeks
Language and format confirmation
Target languages, session formats, relay requirements and whether interpreters are client-supplied or sourced by us.
- T-5 weeks
Room and booth planning
Booth positions set for sightline and isolation, radiator coverage calculated against the seating plan.
- T-2 weeks
Interpreter briefing pack
Agenda, speaker slides, scripts, acronym list and technical glossary compiled and sent to every interpreter.
- Show day −1
Build and channel test
Booths built, isolation and ventilation noise checked, every channel and relay path tested, radiator shadows walked.
- Show day, T-2 hours
Interpreter check-in
Interpreters test their consoles, confirm sightlines and audio quality, and agree rotation with their booth partner.
- Session days to +3 hours
Sessions and strike
Receivers issued and reconciled per session, channels monitored and recorded, then booths struck and receivers counted back.
Risk control
What goes wrong, and how we stop it
What can go wrong
How we prevent it
- What can go wrong
Infrared coverage drops behind a pillar or under a balcony and a block of delegates hears silence.
How we prevent itRadiator placement is calculated against the seating plan and then physically walked with a receiver at build, with an extra radiator held for the shadow that is always discovered.
- What can go wrong
A single interpreter is booked per language to save cost and quality collapses after half an hour.
How we prevent itWe quote two interpreters per booth per language as standard and explain why — sustained simultaneous interpretation beyond roughly thirty minutes is not reliably accurate.
- What can go wrong
Interpreters receive a room microphone feed full of reverberation and struggle to hear the speaker.
How we prevent itEvery booth takes a clean direct feed from the audio console, and the engineer monitors that feed on headphones rather than assuming it is right.
- What can go wrong
A speaker reads from a prepared script at full speed and interpretation falls behind.
How we prevent itScripts and slides go to interpreters at T-2 weeks, and the chair is briefed to remind speakers that they are being interpreted, which is the single most effective intervention available.
- What can go wrong
Certain LED and plasma lighting radiates in the infrared band and corrupts channel reception.
How we prevent itCarrier frequencies are selected to avoid the interference band and a reception test is run with the full event lighting rig live, not with house lights only.
- What can go wrong
Receivers go missing because they were handed out without reconciliation.
How we prevent itIssue against delegate identification, a count at every break, and a documented reconciliation at session end — at a thousand units the loss rate without this is material.
Honest comparison
Is this the right choice for your event?
- Remote simultaneous interpretation instead of on-site boothsOur verdict
RSI is dramatically cheaper, removes booth logistics and gives access to interpreters anywhere. It depends entirely on connectivity and on the interpreter having a clean feed and good sightlines on video, which is fine for a routine webinar and genuinely risky for a high-stakes multilateral session.
- Consecutive interpretation instead of simultaneousOur verdict
Consecutive needs no booths, no receivers and no equipment — the interpreter speaks after the speaker pauses. It roughly doubles the length of every session, which is acceptable for a bilateral meeting and impossible for a full-day agenda.
- Radio or Wi-Fi distribution instead of infraredOur verdict
Radio and app-based distribution cover more area and need no line of sight, which solves the shadowing problem. They also pass through walls, so a confidential session can be received outside the room — which is exactly why government and multilateral work stays on infrared.
- A curtained corner instead of an ISO 4043 boothOur verdict
There is no honest case for it on a session that matters. The booth exists to isolate the interpreter's own voice from the floor audio and to give them sight of the speaker; without both, accuracy falls and the delegates hear the result.
Process
How we deliver
01
Brief & recce
We visit the venue, map power and rigging, and understand your show flow.
02
Design & quote
CAD plans, 3D previews and an itemised quote within 24 hours.
03
Build & rehearse
Load-in, system tuning, content checks and full technical rehearsal.
04
Show & strike
Show-caller-led execution, then a quick, clean load-out.
Locations
Interpretation Equipment by city
Tier 1 metros
Tier 2 cities
FAQ