Which Bengaluru venues do you work at?

BIEC (Several lakh square feet across halls, each taking a few thousand seated); Palace Grounds (10,000-plus across Tripura Vasini and the adjoining grounds); Manpho Convention Centre (Up to around 3,000 in the pillarless main hall). Clear height and drive-in access are excellent — a truck can reverse into the hall — but it sits around 25km out on Tumakuru Road, so crew transit and the shuttle plan consume more of the schedule than the build does. We also cover hotels, farmhouses and open grounds across Whitefield, Koramangala, Indiranagar, Electronic City, Hebbal, MG Road.

How many cameras does my event need?

Three for a panel session with basic IMAG. Four to five for a conference plenary. Six to seven for an award night where you need the walk-up, the reaction and a jib move. Eight or more once you are covering a concert or delivering to a broadcaster. Position quality matters more than count — one great angle beats three poor ones.

Can you deliver to a broadcaster's specification?

Yes, with the specification confirmed in writing at least two weeks out. Broadcasters govern frame rate, colour space, audio loudness and usually require a clean feed without graphics alongside the dirty feed. Those requirements change the build, so they need to be known before cameras are specified rather than discovered at delivery.

How soon can we get a highlight video?

Same night is achievable with an on-site edit position: selects are pulled off shuttle drives while the show is still running and a two to three minute cut is delivered within a few hours of curtain. A full event film with graded footage and a proper narrative takes one to three weeks depending on length.

Do you provide the audio for the video, or does that come from the sound team?

We take a clean programme mix from the audio console, metered and recorded alongside the video, and request audio stems where a post-event film needs flexibility. Camera on-board microphones are recorded only as a sync reference, never as the usable track.

Broadcast & Multi-Camera in Bengaluru by Prime AV Solutions

Conference & Broadcast · Bengaluru, Karnataka

Multi-Camera Broadcast in Bengaluru

The gap between adequate and excellent multi-camera broadcast in Bengaluru is usually preparation: bescom supply in the central business district is serviceable, but the tech parks at whitefield and electronic city run their own captive dg and ups infrastructure regardless, so a town hall inside a campus auditorium is usually on cleaner power than the grid would give. palace grounds and every open venue are fully generated, with a synchronised pair of 200 kva sets as a sensible floor, acoustically enclosed to satisfy kspcb, and a recce that finds the venue's real constraints before quote stage.

WhatsApp a producer

Rated 4.9/5 by 600+ event planners and brands

Lead time: From 5 weeks
Peak season: Sep–Feb
Coverage: Bengaluru & Karnataka

Key takeaway

Broadcast & Multi-Camera in Bengaluru is quoted against your guest count, venue and run of show. Rates hold up well here because the buyers are MNC procurement teams who evaluate on specification, insurance cover and SLA rather than on the lowest quote, so a GCC conference carries a real premium over the regional average. What they demand in return is documentation: GST-clean invoicing, crew insurance, method statements and a named technical owner. Aero India at Yelahanka in odd-numbered Februaries removes essentially all AV inventory and rigging labour from the city for a fortnight. Mysuru Dasara in September-October pulls regional crew and trucks south, Kannada Rajyotsava on 1 November and the Bengaluru Tech Summit week book out conference inventory, and April-May IPL fixtures at Chinnaswamy close the central roads on match evenings — so we quote within 24 hours and hold dates first-come.

Broadcast & Multi-Camera for Bengaluru’s biggest events

Multi-camera production is a disciplined signal chain before it is a creative one. Cameras are genlocked to a common reference — tri-level sync for HD and UHD — so that every source is on the same clock and a cut between them is clean rather than a frame of glitch. Signals run on 12G-SDI over coax for short distances and on SMPTE fibre or triax for long camera positions, with camera control units allowing a vision engineer to shade iris, black level and colour matrix remotely from a rack position. That shading is what makes six cameras look like one camera from six angles, which is the difference between a multi-camera production and six separate recordings.

The room sets the camera plan: riser positions for long lenses, pit space for handhelds, jib clearance and whether the lighting rig will allow a usable exposure. In Bengaluru that plays out at venues like BIEC, Palace Grounds, Manpho Convention Centre, and across Whitefield, Koramangala, Indiranagar, Electronic City.

Camera positions are planned against the show, not the room. A typical award night runs a wide lock-off, two long-lens cameras on a riser at the back for presenter close-ups, a handheld or Steadicam in the pit for the walk-up, a jib for movement and reveals, and PTZ units in positions no operator can occupy. Everything is cut live by a director on a switcher — Ross, Blackmagic ATEM Constellation or a Sony — with the camera operators on intercom receiving frame instructions. A talkback system from Riedel or Clear-Com is non-negotiable: a multi-camera production without reliable comms is just hopeful.

What’s included

Sony & Blackmagic broadcast cameras
Jib cranes, sliders & PTZ
OB-style production control
Same-day highlight edits

Equipment we carry

SonyBlackmagic DesignPanasonicRoss VideoCanonRiedelClear-ComARRI

Why Bengaluru chooses Prime AV

Crews and trucks positioned for fast load-in at Sheraton Grand Bengaluru Whitefield and venues in Sarjapur Road and Whitefield.
Every camera is shaded from the rack by a vision engineer under the actual stage lighting, and the match is re-checked after any significant lighting change.
Isolated camera recordings for every position
Working knowledge of Karnataka venue rules, power sanctions and permission timelines.

Local conditions

Producing multi-camera broadcast in Bengaluru

Weather & the rig

Cameras, lenses and fibre connectors are the equipment least tolerant of moisture and dust, and condensation on a lens moving between a cold control room and a humid outdoor pit costs minutes of show time. At 920m the temperature never forces amplifier derating, which removes a problem most Indian cities have — but it introduces two others. Pre-monsoon and retreating-monsoon evenings in April-May and September-October bring sharp convective storms with 60–70 km/h gusts that arrive inside twenty minutes, so outdoor truss here is engineered for wind, not for rain. And the overnight dew point drop on the plateau leaves consoles, LED faces and connector panels genuinely wet by 5am, which means covers on everything and a warm-up pass before a morning show. Jun–Oct, when both monsoons touch the city and October is the wettest month in the calendar; an open-ground show in that window needs a hard roof rather than a tarpaulin.

Power & redundancy

A broadcast chain needs clean, continuous power on its own distribution, because a momentary dip takes down cameras, CCUs, the switcher and the recording all at once. BESCOM supply in the central business district is serviceable, but the tech parks at Whitefield and Electronic City run their own captive DG and UPS infrastructure regardless, so a town hall inside a campus auditorium is usually on cleaner power than the grid would give. Palace Grounds and every open venue are fully generated, with a synchronised pair of 200 kVA sets as a sensible floor, acoustically enclosed to satisfy KSPCB.

Permits & noise rules

Filming brings its own requirements — venue filming rights, audience consent notices, and clearances for any aerial or drone-mounted camera position. BBMP issues ground and temporary-structure permission, the city police grant the amplified-sound and assembly licence through the jurisdictional DCP, and KSPCB's noise standards apply with the 10pm cut-off treated as a hard stop rather than a guideline. Drone work is unusually constrained for a city of this size: HAL airport sits inside the urban envelope alongside Kempegowda International, and the defence and research establishments around Jalahalli and Yelahanka add their own restrictions on top.

Load-in & access

Camera positions need cable routes that cross audience areas and a control room position with sightline and comms, so the cabling plan has to be agreed before seating is set. Heavy vehicles are restricted inside the Outer Ring Road during peak hours and multi-axles are kept off key corridors through the day, so a BIEC load-in means dispatching by 4am or losing three hours on Tumakuru Road. Metro construction barricading on ORR and around Hebbal has cut turning radii to the point where a 32-ft trailer cannot make some venue approaches at all. City hotels offer service lifts rather than docks, so cases are specified to fit a 1.2m opening.

Season & booking

Aero India at Yelahanka in odd-numbered Februaries removes essentially all AV inventory and rigging labour from the city for a fortnight. Mysuru Dasara in September-October pulls regional crew and trucks south, Kannada Rajyotsava on 1 November and the Bengaluru Tech Summit week book out conference inventory, and April-May IPL fixtures at Chinnaswamy close the central roads on match evenings. Peak demand runs Sep–Feb.

Crew & dispatch

Own Bengaluru base, which also serves as the dispatch point for Mysuru, Mangaluru, Coimbatore and Hubballi work. Load-in support covers Sarjapur Road, Whitefield and the rest of the city.

What it costs here

Rates hold up well here because the buyers are MNC procurement teams who evaluate on specification, insurance cover and SLA rather than on the lowest quote, so a GCC conference carries a real premium over the regional average. What they demand in return is documentation: GST-clean invoicing, crew insurance, method statements and a named technical owner.

Local expectations

Corporate formality is the default. The run of show is locked a week out, teleprompter and confidence monitors are assumed rather than requested, APAC and EMEA dial-ins mean the stream and the record are deliverables with their own sign-off, and simultaneous interpretation turns up more often here than anywhere else in India outside Delhi. A Kannada welcome segment is expected at any public-facing event, and attendee experience teams will audit lectern mic levels and slide legibility from the back row.

Specification

Broadcast & Multi-Camera: technical specification

Typical broadcast & multi-camera specification supplied in Bengaluru.
Specification	Detail
Camera classes	Sony HDC and HXC system cameras, Blackmagic URSA Broadcast, large-sensor cinema bodies
Genlock	Tri-level sync distributed to every source so cuts are frame-clean
Signal transport	12G-SDI on coax for short runs, SMPTE fibre or triax for long camera positions
Camera control	CCU and RCP shading of iris, black level and matrix from the rack position
Switchers	Ross Carbonite, Blackmagic ATEM Constellation, Sony production switchers
Specialist positions	Jib, Steadicam, dolly, slider and PTZ for inaccessible angles
Intercom	Riedel or Clear-Com party-line or digital matrix to every operator and the director
Recording	Programme cut plus isolated camera ISOs for post-event editing
Delivery formats	1080p50 standard, UHD on request, broadcaster spec for frame rate, colour and loudness
On-site edit	Shuttle drive to an edit position for same-day highlight delivery

What happens to the signal afterwards shapes the whole build. If the show feeds IMAG screens, the programme cut must be clean and the switcher has to supply separate outputs for the screens, the stream and the record. If it feeds a broadcaster, their delivery specification governs frame rate, colour space, loudness and the clean feed they require without graphics. If the output is a post-event film, we record isolated camera feeds — ISOs — alongside the programme cut, because an editor with six ISOs can build something the live cut never could. Same-day highlight edits run off a shuttle drive to an on-site edit position while the show is still in progress.

Sizing

What size rig does your event actually need?

Scale	Guests	Recommended setup
Panel session	100 – 400	Three cameras: wide lock-off plus two long lenses, single switcher, programme and ISOs
Conference plenary	500 – 1,500	Four to five cameras with a slider, IMAG programme output, camera shading, ISOs
Award night	1,500 – 4,000	Six to seven cameras including jib and pit handheld, separate IMAG and stream feeds
Concert	5,000 – 20,000	Eight to ten cameras with long lenses, jib, pit and on-stage positions, replay
Televised production	20,000+	Twelve to sixteen cameras, broadcaster spec delivery, EVS replay, matrix intercom

Scope

Multi-Camera Broadcast scope tiers in Bengaluru

Three-Camera Record

Conferences, panels and single-session events needing a record and basic IMAG

Three genlocked cameras with a wide lock-off and two operated positions
Switcher with a clean programme output for screens and record
Camera shading from a rack position for a matched look
Intercom to every operator and the director
Programme cut plus isolated camera recordings

Most booked

Multi-Camera Show

Award nights, concerts and launches with IMAG and a post-event film

Five to seven cameras including a jib and a Steadicam or handheld in the pit
Full OB-style control position with vision engineer and director
Independent outputs for IMAG screens, stream and record
ISO recording of every camera for post-event editing
Same-day highlight edit from an on-site edit position

Broadcast Production

Televised shows, sports events and broadcaster-delivered productions

Eight to sixteen cameras including specialist and PTZ positions
Broadcaster-specification delivery with a clean feed and a graphics feed
Replay and slow-motion positions with a dedicated operator
Digital matrix intercom with per-position talkback routing
Full production department including director, vision engineer and EVS operator

Venues

Where we work in Bengaluru

Venue	Capacity	Production note
BIEC	Several lakh square feet across halls, each taking a few thousand seated	Clear height and drive-in access are excellent — a truck can reverse into the hall — but it sits around 25km out on Tumakuru Road, so crew transit and the shuttle plan consume more of the schedule than the build does.
Palace Grounds	10,000-plus across Tripura Vasini and the adjoining grounds	Open ground with no usable house infrastructure: all power is generated, and the city police enforce the 10pm sound cut more literally here than at almost any other large Indian venue, so the run of show is designed backwards from it.
Manpho Convention Centre	Up to around 3,000 in the pillarless main hall	The hall itself is a genuinely usable column-free box, but the approach is off a permanently congested stretch of Outer Ring Road with a tight dock, so a 32-ft trailer has to be timed against the traffic rather than the call sheet.
Taj Yeshwantpur	Around 1,000 banquet across the ballroom	Hotel service-lift load-in with a height limit, so large LED cabinets and 3m truss have to be substituted or broken down before they reach the building.
Sheraton Grand Bengaluru Whitefield	Around 1,200 across the convention and ballroom space	Convenient for the Whitefield tech corridor, but the arrival road is one of the city's worst bottlenecks, so inbound trucks need a pre-dawn slot or they lose half a day.

Crew

Who turns up on show day

Director
Calls the cut live from the running order, gives frame instructions to operators and decides what the audience sees at every moment.
Vision engineer
Shades every camera from the rack so six sources match, and owns genlock, colour and signal integrity across the chain.
Camera operators
Hold and move shots to the director's call, anticipate the action rather than chase it, and protect the frame through a cut.
Jib and specialist operators
Deliver the movement and reveal shots — jib, Steadicam, dolly — that give a production its production value.
Replay operator
Marks and plays back moments for IMAG or broadcast, working a few seconds behind live with the director.
On-site editor
Pulls selects off shuttle drives during the show and delivers a highlight cut the same night.

What you receive

Camera plan drawing with every position and lens package
Signal flow and output map including genlock distribution
Programme cut recording at full quality
Isolated camera recordings for every position
Clean feed without graphics where a broadcaster requires it
Same-day highlight edit where contracted
Verified media offload report with checksums before any card is reused

Timeline

From enquiry to load-out

T-5 weeks
Camera plan
Running order and stage design reviewed to place camera positions against the moments that must be captured.
T-3 weeks
Signal and comms design
Cable routes, fibre runs, genlock distribution, output map and the intercom topology drawn and agreed.
T-2 weeks
Delivery spec confirmation
Frame rate, colour space, loudness, clean feed and file delivery requirements confirmed with the broadcaster or the post team.
Show day −1
Rig and camera match
Cameras rigged, genlocked and shaded to match under the actual stage lighting, with every signal path proved.
Show day, T-4 hours
Camera rehearsal
Operators walk the running order, the director rehearses the cut, and comms is tested from every position.
Show day to +12 hours
Show, offload and strike
Show cut live with ISOs recording, media offloaded and verified before any card is cleared, then de-rig.

Risk control

What goes wrong, and how we stop it

What can go wrong

How we prevent it

What can go wrong
Six cameras each have a different colour balance and the cut looks like six different events.
How we prevent it
Every camera is shaded from the rack by a vision engineer under the actual stage lighting, and the match is re-checked after any significant lighting change.
What can go wrong
The director loses contact with a camera operator at the critical moment.
How we prevent it
A proper intercom system with per-position talkback and a tested backup channel, plus wired comms on fixed positions rather than relying on wireless packs throughout.
What can go wrong
The post team receives only the programme cut and cannot build the film the client expected.
How we prevent it
Every camera records an isolated feed as standard, and the delivery specification — including ISOs, clean feed and audio stems — is confirmed in writing at T-2 weeks.
What can go wrong
Media cards are cleared before the offload is verified and footage is lost irrecoverably.
How we prevent it
Offload is checksummed and verified against the source before any card is reformatted, with a second copy on separate media before the trucks leave.

Honest comparison

Is this the right choice for your event?

Hiring an OB van instead of a flypack control position
Our verdict
An OB van is faster to deploy and purpose-built, and right for sport and large televised productions. A flypack built into a control room is cheaper, fits venues a van cannot park at, and is more than adequate up to eight or ten cameras.
A single-camera record instead of a multi-camera production
Our verdict
A well-operated single camera with good audio is a perfectly respectable record of a conference and costs a fraction. It cannot serve IMAG, cannot cut to a reaction, and gives an editor nothing to work with — so it is a record, not a production.
PTZ cameras instead of manned positions
Our verdict
PTZ units are excellent in positions no operator can occupy and have become genuinely good. They still cannot anticipate action the way an operator does, and a show cut entirely from PTZs looks subtly late throughout. Mix them in; do not build on them alone.

Demand

What Bengaluru books most

Bengaluru event mix

Corporate conferences, tech summits and GCC town halls
Product and SaaS launches with hybrid or streamed delivery
Trade exhibitions and industry expos at BIEC
Annual days, award nights and employee engagement events
Weddings and receptions at Palace Grounds and city hotels
Concerts and ticketed festival events

Ideal for

Events we power with broadcast & multi-camera in Bengaluru

Award shows

Concerts

Sports events

Process

From brief to standing ovation

Brief & recce

We visit the venue, map power and rigging, and understand your show flow.

Design & quote

CAD plans, 3D previews and an itemised quote within 24 hours.

Build & rehearse

Load-in, system tuning, content checks and full technical rehearsal.

Show & strike

Show-caller-led execution, then a quick, clean load-out.

FAQ