Which Bengaluru venues do you work at?

BIEC (Several lakh square feet across halls, each taking a few thousand seated); Palace Grounds (10,000-plus across Tripura Vasini and the adjoining grounds); Manpho Convention Centre (Up to around 3,000 in the pillarless main hall). Clear height and drive-in access are excellent — a truck can reverse into the hall — but it sits around 25km out on Tumakuru Road, so crew transit and the shuttle plan consume more of the schedule than the build does. We also cover hotels, farmhouses and open grounds across Whitefield, Koramangala, Indiranagar, Electronic City, Hebbal, MG Road.

Can LED panels be curved or built into shapes?

Yes. Most current panel families support concave and convex curving at fixed angle increments, corner and cube builds, floor-rated tiles for foot traffic, and transparent mesh for layering over a set. Each geometry changes rigging and power, so the shape needs to be settled before the rigging plan is drawn.

What content format should my studio deliver?

Author to the exact native canvas resolution we issue in the pixel map, at the frame rate of the show, as an image sequence or a high-bitrate ProRes file. Anything authored to a standard HD or 4K frame and then fitted to a non-standard canvas will be scaled, and scaling on LED is immediately visible.

How much power does an LED wall draw?

Roughly 150 to 350 watts per square metre on average content, with peaks well above that on full white. Distribution must be sized for peak rather than average, phases balanced across the grid, otherwise the first full-white frame of your opening title trips a breaker.

How do I choose the right pixel pitch?

Start from how close the nearest person stands. As a working rule the viewing distance in metres at which an image resolves cleanly is roughly the pixel pitch in millimetres, so P2.6 reads from under three metres and P4.8 wants five or more. Then check the content: live text and close camera work need finer pitch than colour and motion graphics.

Visual · Bengaluru, Karnataka

LED Wall Rental in Bengaluru

The gap between adequate and excellent LED wall rental in Bengaluru is usually preparation: bescom supply in the central business district is serviceable, but the tech parks at whitefield and electronic city run their own captive dg and ups infrastructure regardless, so a town hall inside a campus auditorium is usually on cleaner power than the grid would give. palace grounds and every open venue are fully generated, with a synchronised pair of 200 kva sets as a sensible floor, acoustically enclosed to satisfy kspcb, and a recce that finds the venue's real constraints before quote stage.

WhatsApp a producer

Rated 4.9/5 by 600+ event planners and brands

Lead time: From 5 weeks
Peak season: Sep–Feb
Coverage: Bengaluru & Karnataka

Key takeaway

LED Wall Rental in Bengaluru is quoted against your guest count, venue and run of show. Rates hold up well here because the buyers are MNC procurement teams who evaluate on specification, insurance cover and SLA rather than on the lowest quote, so a GCC conference carries a real premium over the regional average. What they demand in return is documentation: GST-clean invoicing, crew insurance, method statements and a named technical owner. Aero India at Yelahanka in odd-numbered Februaries removes essentially all AV inventory and rigging labour from the city for a fortnight. Mysuru Dasara in September-October pulls regional crew and trucks south, Kannada Rajyotsava on 1 November and the Bengaluru Tech Summit week book out conference inventory, and April-May IPL fixtures at Chinnaswamy close the central roads on match evenings — so we quote within 24 hours and hold dates first-come.

LED Wall Rental for Bengaluru’s biggest events

Creative LED is a maths problem before it is a visual one. Pixel pitch sets the minimum comfortable viewing distance — as a working rule, the distance in metres at which the image resolves cleanly is roughly the pitch in millimetres, so a P3.9 panel reads well from about four metres and a P2.6 from under three. We choose pitch from where the nearest audience actually stands and from what the content is: a logo-and-colour backdrop forgives a coarser pitch than live text or a camera that will push in on the surface. The panel grid is then drawn to native resolution so content is authored pixel-for-pixel rather than scaled.

Scenic LED is shaped around the room — ceiling trim, sightlines and the position of the nearest seat decide pitch, geometry and whether the build flies or stacks. In Bengaluru that plays out at venues like BIEC, Palace Grounds, Manpho Convention Centre, and across Whitefield, Koramangala, Indiranagar, Electronic City.

Processing decides whether the wall looks like a screen or like a surface. Novastar MCTRL4K and Brompton Tessera SX40 handle large canvases, and the Brompton path adds the tools that matter for cameras: high refresh rates, ShutterSync to lock panel refresh to the camera shutter, and genlock so the wall and the broadcast chain share a clock. Without that, a wall sitting at a low refresh rate will show rolling bands and tearing on every camera cut even though it looks perfect to the eye. Indoor walls typically run 800 to 1,500 nits; outdoor daylight surfaces need 5,000 nits and upwards to hold an image against sun.

What’s included

P1.9 to P4.8 pixel pitch
Curved, corner, floor & ceiling LED
Novastar & Brompton processing
Ground-stack or flown

Equipment we carry

AbsenROE VisualUniluminNovastarBrompton TechnologydisguiseResolumeBarco

Why Bengaluru chooses Prime AV

Crews and trucks positioned for fast load-in at Sheraton Grand Bengaluru Whitefield and venues in Sarjapur Road and Whitefield.
A wind-load assessment is run against panel area and trim height, with a documented wind speed at which the wall is lowered or the show pauses.
Brightness and colour calibration report across the surface
Working knowledge of Karnataka venue rules, power sanctions and permission timelines.

Local conditions

Producing LED wall rental in Bengaluru

Weather & the rig

LED panels are the first thing a climate punishes — humidity creeps into ribbon cables, direct sun washes out anything under 5,000 nits, and wind load on a flown wall rises fast with height and surface area. At 920m the temperature never forces amplifier derating, which removes a problem most Indian cities have — but it introduces two others. Pre-monsoon and retreating-monsoon evenings in April-May and September-October bring sharp convective storms with 60–70 km/h gusts that arrive inside twenty minutes, so outdoor truss here is engineered for wind, not for rain. And the overnight dew point drop on the plateau leaves consoles, LED faces and connector panels genuinely wet by 5am, which means covers on everything and a warm-up pass before a morning show. Jun–Oct, when both monsoons touch the city and October is the wettest month in the calendar; an open-ground show in that window needs a hard roof rather than a tarpaulin.

Power & redundancy

A large LED canvas draws several hundred watts per square metre at peak and spikes on white frames, so distribution is sized to the worst content frame rather than to an average. BESCOM supply in the central business district is serviceable, but the tech parks at Whitefield and Electronic City run their own captive DG and UPS infrastructure regardless, so a town hall inside a campus auditorium is usually on cleaner power than the grid would give. Palace Grounds and every open venue are fully generated, with a synchronised pair of 200 kVA sets as a sensible floor, acoustically enclosed to satisfy KSPCB.

Permits & noise rules

Flown scenic LED needs structural sign-off on point loads, and outdoor builds attract both wind-load scrutiny and, near residential frontage, light-spill objections. BBMP issues ground and temporary-structure permission, the city police grant the amplified-sound and assembly licence through the jurisdictional DCP, and KSPCB's noise standards apply with the 10pm cut-off treated as a hard stop rather than a guideline. Drone work is unusually constrained for a city of this size: HAL airport sits inside the urban envelope alongside Kempegowda International, and the defence and research establishments around Jalahalli and Yelahanka add their own restrictions on top.

Load-in & access

Panel cases are heavy, numerous and must arrive in build order, so dock height, lift capacity and the available load-in window set how much surface can realistically go up. Heavy vehicles are restricted inside the Outer Ring Road during peak hours and multi-axles are kept off key corridors through the day, so a BIEC load-in means dispatching by 4am or losing three hours on Tumakuru Road. Metro construction barricading on ORR and around Hebbal has cut turning radii to the point where a 32-ft trailer cannot make some venue approaches at all. City hotels offer service lifts rather than docks, so cases are specified to fit a 1.2m opening.

Season & booking

Aero India at Yelahanka in odd-numbered Februaries removes essentially all AV inventory and rigging labour from the city for a fortnight. Mysuru Dasara in September-October pulls regional crew and trucks south, Kannada Rajyotsava on 1 November and the Bengaluru Tech Summit week book out conference inventory, and April-May IPL fixtures at Chinnaswamy close the central roads on match evenings. Peak demand runs Sep–Feb.

Crew & dispatch

Own Bengaluru base, which also serves as the dispatch point for Mysuru, Mangaluru, Coimbatore and Hubballi work. Load-in support covers Sarjapur Road, Whitefield and the rest of the city.

What it costs here

Rates hold up well here because the buyers are MNC procurement teams who evaluate on specification, insurance cover and SLA rather than on the lowest quote, so a GCC conference carries a real premium over the regional average. What they demand in return is documentation: GST-clean invoicing, crew insurance, method statements and a named technical owner.

Local expectations

Corporate formality is the default. The run of show is locked a week out, teleprompter and confidence monitors are assumed rather than requested, APAC and EMEA dial-ins mean the stream and the record are deliverables with their own sign-off, and simultaneous interpretation turns up more often here than anywhere else in India outside Delhi. A Kannada welcome segment is expected at any public-facing event, and attendee experience teams will audit lectern mic levels and slide legibility from the back row.

Specification

LED Wall Rental: technical specification

Typical LED wall rental specification supplied in Bengaluru.
Specification	Detail
Pixel pitch range	P1.9 – P4.8 indoor, P4.8 – P10 outdoor
Viewing distance rule	Minimum comfortable distance in metres ≈ pixel pitch in mm
Brightness	800 – 1,500 nits indoor, 5,000 – 7,500 nits outdoor daylight
Panel refresh for camera	3,840 Hz or higher, with ShutterSync and genlock on Brompton
Processing	Novastar MCTRL4K / VX1000, Brompton Tessera SX40 with Hydra calibration
Ingress protection	IP43 indoor cabinets, IP65 front and rear for outdoor builds
Power draw	Approximately 150 – 350 W per square metre average, peaks higher on white
Geometry	Flat, curved, corner, cube, floor-rated, transparent mesh and kinetic builds
Rigging	Flown on certified motors with point-load report, or ground-stacked on goalpost frames
Spares carried	Five per cent spare panels plus receiving cards, PSUs and ribbon cables

Creative geometry is where scenic LED earns its budget. Curved and corner builds, suspended cubes, floor tiles rated for foot traffic, transparent mesh over a set and kinetic panels on winches all come from the same panel families but each changes the rigging and the power plan. A flown wall needs a point-load calculation and a wind-load assessment outdoors, because a solid LED surface is effectively a sail and the load rises steeply with height and area. Cable dressing matters too: data and power loop through panels in a defined order, and a single ribbon cable creeping out of its socket in humidity takes out a column.

Sizing

What size rig does your event actually need?

Scale	Guests	Recommended setup
Panel backdrop	100 – 400	6 m x 3 m at P3.9, ground-stacked, single processor, 18 sq m
Stage width wall	400 – 1,500	10 m x 5 m at P2.6 or P3.9, flown, Brompton with ShutterSync, 50 sq m
Wrapped stage design	1,500 – 5,000	Main plus side panels and a floor section, 120 – 180 sq m, media server playback
Immersive room	200 – 800	Three-wall plus floor at P2.6, edge-matched, 250 sq m, calibrated as one canvas
Festival scenic	10,000+	Outdoor IP65 at P4.8 – P6.9, 300 sq m+, wind-load assessed, redundant power

Scope

LED Wall Rental scope tiers in Bengaluru

Backdrop Canvas

Conferences and award stages, up to 40 sq m of surface

P2.6 or P3.9 indoor panels on a ground-stacked goalpost
Novastar processing with native-resolution canvas mapping
Content playback with one operator and a hot backup machine
Five per cent spare panels and consumables on site
LED technician plus one rigger for the build

Most booked

Scenic Build

Launches, concerts and award nights, 50 – 180 sq m with shaped geometry

Curved, corner or multi-surface build with flown sections
Brompton processing with ShutterSync and genlock for cameras
disguise or Resolume media server with timecoded playback
Point-load report and certified rigging
Two LED technicians, a media server operator and a rigging crew

Immersive Surface

Large stage designs and immersive rooms, 200 sq m and above

Multi-plane design with floor LED, cubes and kinetic elements
Redundant processing with hot-standby servers and dual data paths
Full panel calibration pass for colour and brightness uniformity
Content pipeline support with pixel maps issued to your studio
Full-time crew across build, show days and strike

Venues

Where we work in Bengaluru

Venue	Capacity	Production note
BIEC	Several lakh square feet across halls, each taking a few thousand seated	Clear height and drive-in access are excellent — a truck can reverse into the hall — but it sits around 25km out on Tumakuru Road, so crew transit and the shuttle plan consume more of the schedule than the build does.
Palace Grounds	10,000-plus across Tripura Vasini and the adjoining grounds	Open ground with no usable house infrastructure: all power is generated, and the city police enforce the 10pm sound cut more literally here than at almost any other large Indian venue, so the run of show is designed backwards from it.
Manpho Convention Centre	Up to around 3,000 in the pillarless main hall	The hall itself is a genuinely usable column-free box, but the approach is off a permanently congested stretch of Outer Ring Road with a tight dock, so a 32-ft trailer has to be timed against the traffic rather than the call sheet.
Taj Yeshwantpur	Around 1,000 banquet across the ballroom	Hotel service-lift load-in with a height limit, so large LED cabinets and 3m truss have to be substituted or broken down before they reach the building.
Sheraton Grand Bengaluru Whitefield	Around 1,200 across the convention and ballroom space	Convenient for the Whitefield tech corridor, but the arrival road is one of the city's worst bottlenecks, so inbound trucks need a pre-dawn slot or they lose half a day.

Crew

Who turns up on show day

LED technician
Builds the panel grid, maps the canvas to native resolution and chases any dead panel, card or ribbon on sight.
Media server operator
Runs disguise or Resolume, holds the content timeline against timecode and keeps a hot backup machine mirrored.
Rigger
Flies the sections, checks point loads against the report and manages any kinetic or winch elements.
Video engineer
Owns processing, refresh rate, ShutterSync and genlock so the wall behaves correctly on every camera.
Content technician
Conforms incoming content to the pixel map, fixes aspect and colour issues and version-controls what plays.

What you receive

Pixel map with native canvas resolution, aspect ratio and safe areas
Panel grid drawing with data and power loop order
Point-load report and, outdoors, a wind-load assessment
Processor configuration record including refresh, ShutterSync and genlock settings
Brightness and colour calibration report across the surface
Content playlist with timecode cues and a backup on two drives
Spares inventory log and a record of any panel swapped during the run

Timeline

From enquiry to load-out

T-5 weeks
Pitch and geometry decision
Nearest viewing distance, camera plan and content type set the pixel pitch and the panel grid.
T-4 weeks
Pixel map issue
Your content studio receives the exact canvas resolution, aspect and safe areas so nothing is authored to be scaled.
T-2 weeks
Rigging and power sign-off
Point-load report, wind-load assessment for outdoor builds and the power schedule go to the venue.
Show day −2 to −1
Build and calibration
Panels built, data and power looped, canvas mapped, then a brightness and colour calibration pass across the surface.
Show day −1
Camera check
Refresh, ShutterSync and genlock verified live through the actual cameras, with content on screen.
Show day to +6 hours
Show and strike
Operated through the show with spares on hand, then de-rigged panel by panel into cases in build order.

Risk control

What goes wrong, and how we stop it

What can go wrong

How we prevent it

What can go wrong
An outdoor flown wall becomes a sail and the wind load exceeds the structure's rating.
How we prevent it
A wind-load assessment is run against panel area and trim height, with a documented wind speed at which the wall is lowered or the show pauses.
What can go wrong
The front row sits three metres from a P4.8 panel and sees pixels rather than an image.
How we prevent it
Pitch is chosen from the real nearest-audience distance, and where seating cannot move we specify a finer pitch for the lower sections only.
What can go wrong
Average power is calculated from the spec sheet and the breaker trips on a full-white frame.
How we prevent it
Distribution is sized for peak draw on white content, not average, with phases balanced across the panel grid and content peak-limited where sensible.
What can go wrong
The wall looks flawless to the eye but shows rolling bands on every camera.
How we prevent it
Run panels at 3,840 Hz or higher and lock ShutterSync and genlock to the camera chain, then verify through the actual cameras before the show, not at rehearsal.

Honest comparison

Is this the right choice for your event?

Buying a small wall outright instead of renting
Our verdict
For a venue or a brand running weekly events, ownership pays back within a year or two. For anything less frequent, rental covers the processing, the spares, the calibration and the crew that a purchased wall quietly needs.
Projection instead of LED for a stage backdrop
Our verdict
Projection is far cheaper per square metre for very large surfaces and looks beautiful on texture. LED wins whenever there is ambient light, a camera, or performers who would walk through a projector beam.
A coarser pixel pitch to save budget
Our verdict
Often the right call. If the nearest viewer is eight metres away and the content is graphics rather than text, P4.8 looks identical to P2.6 at a fraction of the cost. It only fails when a camera pushes in.

Demand

What Bengaluru books most

Bengaluru event mix

Corporate conferences, tech summits and GCC town halls
Product and SaaS launches with hybrid or streamed delivery
Trade exhibitions and industry expos at BIEC
Annual days, award nights and employee engagement events
Weddings and receptions at Palace Grounds and city hotels
Concerts and ticketed festival events

Ideal for

Events we power with LED wall rental in Bengaluru

Conferences

Concerts

Award nights

Process

From brief to standing ovation

Brief & recce

We visit the venue, map power and rigging, and understand your show flow.

Design & quote

CAD plans, 3D previews and an itemised quote within 24 hours.

Build & rehearse

Load-in, system tuning, content checks and full technical rehearsal.

Show & strike

Show-caller-led execution, then a quick, clean load-out.

FAQ