Which Kolkata venues do you work at?

Biswa Bangla Convention Centre (Around 2,500 in the main hall plus a large grand ballroom at New Town); Science City (Around 2,200 in the Main Auditorium with a smaller Mini Auditorium alongside); Netaji Indoor Stadium (Around 12,000 in concert configuration). The city's only purpose-built modern convention venue, with generous clear height and working docks, which makes it the default whenever a design needs hung loads rather than towers. We also cover hotels, farmhouses and open grounds across Salt Lake, New Town, Park Street, Ballygunge, Rajarhat, Alipore.

What is the difference between an LED wall and an LED screen booking?

An LED wall is scenic: shaped, curved, floor and cube geometry built as part of the stage design, authored to a custom pixel map. An LED screen booking is about visibility — IMAG and delay screens in standard formats so distant audiences can see what is happening. Different panels often, very different design work.

Can LED panels be curved or built into shapes?

Yes. Most current panel families support concave and convex curving at fixed angle increments, corner and cube builds, floor-rated tiles for foot traffic, and transparent mesh for layering over a set. Each geometry changes rigging and power, so the shape needs to be settled before the rigging plan is drawn.

What content format should my studio deliver?

Author to the exact native canvas resolution we issue in the pixel map, at the frame rate of the show, as an image sequence or a high-bitrate ProRes file. Anything authored to a standard HD or 4K frame and then fitted to a non-standard canvas will be scaled, and scaling on LED is immediately visible.

How much power does an LED wall draw?

Roughly 150 to 350 watts per square metre on average content, with peaks well above that on full white. Distribution must be sized for peak rather than average, phases balanced across the grid, otherwise the first full-white frame of your opening title trips a breaker.

Visual · Kolkata, West Bengal

LED Wall Rental in Kolkata

Durga Puja is not a season here, it is the industry: thousands of pandals commission sound, lighting and structural work on a scale no other Indian city matches in a single fortnight. Around that sit the Sector V IT belt, the legacy engineering, tea and jute houses, a government and PSU circuit, and a music and theatre audience that genuinely judges audio quality. Prime AV Solutions supplies the LED wall rental behind those events — designed on paper, proven in rehearsal and run by our own crew.

WhatsApp a producer

Rated 4.9/5 by 600+ event planners and brands

Lead time: From 5 weeks
Peak season: Oct–Feb
Coverage: Kolkata & West Bengal

Key takeaway

LED Wall Rental in Kolkata is quoted against your guest count, venue and run of show. Outside Puja this is a value market with strong, experienced local technical labour at reasonable day rates, so a two-day conference costs appreciably less here than the same build in Mumbai or Delhi. Inside the Puja window the same inventory prices at a multiple and has to be committed months ahead, which is a conversation to have in June rather than in September. From Mahalaya through Lakshmi Puja and on to Kali Puja, roughly late September to early November, every scaffolder, generator, line array and lighting rig in eastern India is committed and rates reflect it. The Kolkata International Film Festival in November and the Boi Mela in late January take the auditoria, and Poila Boishakh in mid-April brings its own cluster of cultural programming — so we quote within 24 hours and hold dates first-come.

LED Wall Rental for Kolkata’s biggest events

Creative LED is a maths problem before it is a visual one. Pixel pitch sets the minimum comfortable viewing distance — as a working rule, the distance in metres at which the image resolves cleanly is roughly the pitch in millimetres, so a P3.9 panel reads well from about four metres and a P2.6 from under three. We choose pitch from where the nearest audience actually stands and from what the content is: a logo-and-colour backdrop forgives a coarser pitch than live text or a camera that will push in on the surface. The panel grid is then drawn to native resolution so content is authored pixel-for-pixel rather than scaled.

Scenic LED is shaped around the room — ceiling trim, sightlines and the position of the nearest seat decide pitch, geometry and whether the build flies or stacks. In Kolkata that plays out at venues like Biswa Bangla Convention Centre, Science City, Netaji Indoor Stadium, and across Salt Lake, New Town, Park Street, Ballygunge.

Processing decides whether the wall looks like a screen or like a surface. Novastar MCTRL4K and Brompton Tessera SX40 handle large canvases, and the Brompton path adds the tools that matter for cameras: high refresh rates, ShutterSync to lock panel refresh to the camera shutter, and genlock so the wall and the broadcast chain share a clock. Without that, a wall sitting at a low refresh rate will show rolling bands and tearing on every camera cut even though it looks perfect to the eye. Indoor walls typically run 800 to 1,500 nits; outdoor daylight surfaces need 5,000 nits and upwards to hold an image against sun.

What’s included

P1.9 to P4.8 pixel pitch
Curved, corner, floor & ceiling LED
Novastar & Brompton processing
Ground-stack or flown

Equipment we carry

AbsenROE VisualUniluminNovastarBrompton TechnologydisguiseResolumeBarco

Why Kolkata chooses Prime AV

Crews and trucks positioned for fast load-in at Biswa Bangla Convention Centre and venues in Alipore and EM Bypass.
The pixel map goes to the content studio at T-4 weeks with exact resolution and safe areas, and we conform and review every file before build day.
Processor configuration record including refresh, ShutterSync and genlock settings
Working knowledge of West Bengal venue rules, power sanctions and permission timelines.

Local conditions

Producing LED wall rental in Kolkata

Weather & the rig

LED panels are the first thing a climate punishes — humidity creeps into ribbon cables, direct sun washes out anything under 5,000 nits, and wind load on a flown wall rises fast with height and surface area. The Kalbaisakhi nor'westers in April and May are the design case here: they arrive in minutes with 70–90 km/h gusts, which means outdoor truss in Kolkata is ballasted and signed off for wind loading rather than merely sheeted against rain. Humidity sits near 80% from April to October and the Hooghly keeps overnight dew heavy enough that an outdoor projection surface will fog by 4am and a lectern mic capsule picks up moisture if left uncovered. Jun–Sep monsoon, when the low-lying southern and central wards waterlog within an hour of a heavy cell; and Sep–Oct if you need any inventory at all for something other than Puja.

Power & redundancy

A large LED canvas draws several hundred watts per square metre at peak and spikes on white frames, so distribution is sized to the worst content frame rather than to an average. CESC's city network is genuinely one of the better urban utilities in India, so indoor venues run on house power confidently. Puja pandals are a different exercise: temporary sanctioned connections are applied for formally through CESC or WBSEDCL well in advance, and the load per pandal is capped at what the application granted. Maidan and open-ground events are DG-fed with acoustic enclosures under WBPCB norms.

Permits & noise rules

Flown scenic LED needs structural sign-off on point loads, and outdoor builds attract both wind-load scrutiny and, near residential frontage, light-spill objections. Kolkata Municipal Corporation handles structures, the Kolkata Police Commissioner's office with the local police station licenses pandals and loudspeaker use, and WBPCB applies the noise rules with a 10pm to 6am silence period and a time-boxed festival relaxation. The Maidan is Army land, so an event there needs Eastern Command's NOC as a genuine step in the critical path rather than a formality. Drone operation is limited by the Dum Dum airport zone and by Fort William's restrictions over central Kolkata.

Load-in & access

Panel cases are heavy, numerous and must arrive in build order, so dock height, lift capacity and the available load-in window set how much surface can realistically go up. Larger goods vehicles are barred from central Kolkata through the day, and arrival timing is dictated by which Hooghly crossing the truck uses. The Puja constraint is unlike anything else in India: pandals in the north Kolkata lanes around Shyambazar, Kumartuli and Bagbazar are reached only by handcart for the final 200m, the bamboo structure is complete before any kit arrives, and the hang points are the structure the decorator built, so the rigging design has to be agreed with the pandal fabricator weeks earlier.

Season & booking

From Mahalaya through Lakshmi Puja and on to Kali Puja, roughly late September to early November, every scaffolder, generator, line array and lighting rig in eastern India is committed and rates reflect it. The Kolkata International Film Festival in November and the Boi Mela in late January take the auditoria, and Poila Boishakh in mid-April brings its own cluster of cultural programming. Peak demand runs Oct–Feb.

Crew & dispatch

Own Kolkata base, which is also the practical origin for Patna, Ranchi, Bhubaneswar and Guwahati work. Load-in support covers Alipore, EM Bypass and the rest of the city.

What it costs here

Outside Puja this is a value market with strong, experienced local technical labour at reasonable day rates, so a two-day conference costs appreciably less here than the same build in Mumbai or Delhi. Inside the Puja window the same inventory prices at a multiple and has to be committed months ahead, which is a conversation to have in June rather than in September.

Local expectations

A Bengali audience for live music will notice a coloured PA and say so — Rabindra Sangeet, band and classical programming here want natural tonality and a low noise floor rather than brute level, and the vocal chain is judged more closely than the lighting. Puja committees expect continuous operation across five days, which means shift rotation, a crew rest plan and spares on site rather than in the warehouse. Bengali-language compering is the default and the committee's own hierarchy governs stage access.

Specification

LED Wall Rental: technical specification

Typical LED wall rental specification supplied in Kolkata.
Specification	Detail
Pixel pitch range	P1.9 – P4.8 indoor, P4.8 – P10 outdoor
Viewing distance rule	Minimum comfortable distance in metres ≈ pixel pitch in mm
Brightness	800 – 1,500 nits indoor, 5,000 – 7,500 nits outdoor daylight
Panel refresh for camera	3,840 Hz or higher, with ShutterSync and genlock on Brompton
Processing	Novastar MCTRL4K / VX1000, Brompton Tessera SX40 with Hydra calibration
Ingress protection	IP43 indoor cabinets, IP65 front and rear for outdoor builds
Power draw	Approximately 150 – 350 W per square metre average, peaks higher on white
Geometry	Flat, curved, corner, cube, floor-rated, transparent mesh and kinetic builds
Rigging	Flown on certified motors with point-load report, or ground-stacked on goalpost frames
Spares carried	Five per cent spare panels plus receiving cards, PSUs and ribbon cables

Creative geometry is where scenic LED earns its budget. Curved and corner builds, suspended cubes, floor tiles rated for foot traffic, transparent mesh over a set and kinetic panels on winches all come from the same panel families but each changes the rigging and the power plan. A flown wall needs a point-load calculation and a wind-load assessment outdoors, because a solid LED surface is effectively a sail and the load rises steeply with height and area. Cable dressing matters too: data and power loop through panels in a defined order, and a single ribbon cable creeping out of its socket in humidity takes out a column.

Sizing

What size rig does your event actually need?

Scale	Guests	Recommended setup
Panel backdrop	100 – 400	6 m x 3 m at P3.9, ground-stacked, single processor, 18 sq m
Stage width wall	400 – 1,500	10 m x 5 m at P2.6 or P3.9, flown, Brompton with ShutterSync, 50 sq m
Wrapped stage design	1,500 – 5,000	Main plus side panels and a floor section, 120 – 180 sq m, media server playback
Immersive room	200 – 800	Three-wall plus floor at P2.6, edge-matched, 250 sq m, calibrated as one canvas
Festival scenic	10,000+	Outdoor IP65 at P4.8 – P6.9, 300 sq m+, wind-load assessed, redundant power

Scope

LED Wall Rental scope tiers in Kolkata

Backdrop Canvas

Conferences and award stages, up to 40 sq m of surface

P2.6 or P3.9 indoor panels on a ground-stacked goalpost
Novastar processing with native-resolution canvas mapping
Content playback with one operator and a hot backup machine
Five per cent spare panels and consumables on site
LED technician plus one rigger for the build

Most booked

Scenic Build

Launches, concerts and award nights, 50 – 180 sq m with shaped geometry

Curved, corner or multi-surface build with flown sections
Brompton processing with ShutterSync and genlock for cameras
disguise or Resolume media server with timecoded playback
Point-load report and certified rigging
Two LED technicians, a media server operator and a rigging crew

Immersive Surface

Large stage designs and immersive rooms, 200 sq m and above

Multi-plane design with floor LED, cubes and kinetic elements
Redundant processing with hot-standby servers and dual data paths
Full panel calibration pass for colour and brightness uniformity
Content pipeline support with pixel maps issued to your studio
Full-time crew across build, show days and strike

Venues

Where we work in Kolkata

Venue	Capacity	Production note
Biswa Bangla Convention Centre	Around 2,500 in the main hall plus a large grand ballroom at New Town	The city's only purpose-built modern convention venue, with generous clear height and working docks, which makes it the default whenever a design needs hung loads rather than towers.
Science City	Around 2,200 in the Main Auditorium with a smaller Mini Auditorium alongside	A fixed-seat theatre with house rigging positions and a fixed projection throw, so screen geometry is decided by the building and additional loads need the venue's engineering sign-off.
Netaji Indoor Stadium	Around 12,000 in concert configuration	Roof rigging is effectively unavailable, so the entire package is ground-supported, and the only vehicle approach runs through the congested Maidan roads under police bandobast on event days.
Rabindra Sadan	Around 1,000 seated	A cultural-complex auditorium with house infrastructure and a protective attitude to it, so visiting rigs work within the existing hang points and the build window is tight between programmes.
ITC Royal Bengal	Around 1,500 banquet across the ballroom and pre-function	Modern hotel with a usable service dock, but New Town traffic and the venue's own guest-movement rules push load-in to overnight slots.

Crew

Who turns up on show day

LED technician
Builds the panel grid, maps the canvas to native resolution and chases any dead panel, card or ribbon on sight.
Media server operator
Runs disguise or Resolume, holds the content timeline against timecode and keeps a hot backup machine mirrored.
Rigger
Flies the sections, checks point loads against the report and manages any kinetic or winch elements.
Video engineer
Owns processing, refresh rate, ShutterSync and genlock so the wall behaves correctly on every camera.
Content technician
Conforms incoming content to the pixel map, fixes aspect and colour issues and version-controls what plays.

What you receive

Pixel map with native canvas resolution, aspect ratio and safe areas
Panel grid drawing with data and power loop order
Point-load report and, outdoors, a wind-load assessment
Processor configuration record including refresh, ShutterSync and genlock settings
Brightness and colour calibration report across the surface
Content playlist with timecode cues and a backup on two drives
Spares inventory log and a record of any panel swapped during the run

Timeline

From enquiry to load-out

T-5 weeks
Pitch and geometry decision
Nearest viewing distance, camera plan and content type set the pixel pitch and the panel grid.
T-4 weeks
Pixel map issue
Your content studio receives the exact canvas resolution, aspect and safe areas so nothing is authored to be scaled.
T-2 weeks
Rigging and power sign-off
Point-load report, wind-load assessment for outdoor builds and the power schedule go to the venue.
Show day −2 to −1
Build and calibration
Panels built, data and power looped, canvas mapped, then a brightness and colour calibration pass across the surface.
Show day −1
Camera check
Refresh, ShutterSync and genlock verified live through the actual cameras, with content on screen.
Show day to +6 hours
Show and strike
Operated through the show with spares on hand, then de-rigged panel by panel into cases in build order.

Risk control

What goes wrong, and how we stop it

What can go wrong

How we prevent it

What can go wrong
Content authored at 1920 x 1080 is stretched onto a non-standard canvas and every logo distorts.
How we prevent it
The pixel map goes to the content studio at T-4 weeks with exact resolution and safe areas, and we conform and review every file before build day.
What can go wrong
Humidity works a ribbon cable loose and a column of panels goes dark mid-show.
How we prevent it
Cables are dressed and strain-relieved at build, connections are reseated after the first full power cycle, and five per cent spare panels and cards are on site.
What can go wrong
An outdoor flown wall becomes a sail and the wind load exceeds the structure's rating.
How we prevent it
A wind-load assessment is run against panel area and trim height, with a documented wind speed at which the wall is lowered or the show pauses.
What can go wrong
The front row sits three metres from a P4.8 panel and sees pixels rather than an image.
How we prevent it
Pitch is chosen from the real nearest-audience distance, and where seating cannot move we specify a finer pitch for the lower sections only.

Honest comparison

Is this the right choice for your event?

A coarser pixel pitch to save budget
Our verdict
Often the right call. If the nearest viewer is eight metres away and the content is graphics rather than text, P4.8 looks identical to P2.6 at a fraction of the cost. It only fails when a camera pushes in.
Ground-stacking instead of flying the wall
Our verdict
Ground stacks are cheaper, faster and avoid a rigging sign-off. The trade-off is a visible frame, a higher bottom edge and lost stage depth, which matters on a set but not behind a lectern.
Buying a small wall outright instead of renting
Our verdict
For a venue or a brand running weekly events, ownership pays back within a year or two. For anything less frequent, rental covers the processing, the spares, the calibration and the crew that a purchased wall quietly needs.

Demand

What Kolkata books most

Kolkata event mix

Durga Puja pandal sound, lighting and AV
Corporate conferences and dealer meets at Biswa Bangla and city hotels
Live music, theatre and cultural programming
Trade exhibitions and industry expos
Weddings through the December to February window
Government, PSU and academic conferences

Ideal for

Events we power with LED wall rental in Kolkata

Conferences

Concerts

Award nights

Process

From brief to standing ovation

Brief & recce

We visit the venue, map power and rigging, and understand your show flow.

Design & quote

CAD plans, 3D previews and an itemised quote within 24 hours.

Build & rehearse

Load-in, system tuning, content checks and full technical rehearsal.

Show & strike

Show-caller-led execution, then a quick, clean load-out.

FAQ