Visual · Siliguri, West Bengal
LED Wall Rental in Siliguri
In Siliguri, marwari and bengali trading-family weddings set the standard everything else is measured against. Our LED wall rental is specified to clear that bar at Cinnamon Siliguri and anywhere else in the city.
- Lead time
- From 5 weeks
- Peak season
- Oct–Mar
- Coverage
- Siliguri & West Bengal
Key takeaway
LED Wall Rental for Siliguri’s biggest events
Creative LED is a maths problem before it is a visual one. Pixel pitch sets the minimum comfortable viewing distance — as a working rule, the distance in metres at which the image resolves cleanly is roughly the pitch in millimetres, so a P3.9 panel reads well from about four metres and a P2.6 from under three. We choose pitch from where the nearest audience actually stands and from what the content is: a logo-and-colour backdrop forgives a coarser pitch than live text or a camera that will push in on the surface. The panel grid is then drawn to native resolution so content is authored pixel-for-pixel rather than scaled.
Scenic LED is shaped around the room — ceiling trim, sightlines and the position of the nearest seat decide pitch, geometry and whether the build flies or stacks. In Siliguri that plays out at venues like Cinnamon Siliguri, Kanchenjunga Stadium, Mayfair Siliguri, and across Sevoke Road, Hill Cart Road, Matigara, Pradhan Nagar.
Processing decides whether the wall looks like a screen or like a surface. Novastar MCTRL4K and Brompton Tessera SX40 handle large canvases, and the Brompton path adds the tools that matter for cameras: high refresh rates, ShutterSync to lock panel refresh to the camera shutter, and genlock so the wall and the broadcast chain share a clock. Without that, a wall sitting at a low refresh rate will show rolling bands and tearing on every camera cut even though it looks perfect to the eye. Indoor walls typically run 800 to 1,500 nits; outdoor daylight surfaces need 5,000 nits and upwards to hold an image against sun.
What’s included
- P1.9 to P4.8 pixel pitch
- Curved, corner, floor & ceiling LED
- Novastar & Brompton processing
- Ground-stack or flown
Equipment we carry
Why Siliguri chooses Prime AV
- Crews and trucks positioned for fast load-in at Mayfair Siliguri and venues in Matigara and Pradhan Nagar.
- Cables are dressed and strain-relieved at build, connections are reseated after the first full power cycle, and five per cent spare panels and cards are on site.
- Point-load report and, outdoors, a wind-load assessment
- Working knowledge of West Bengal venue rules, power sanctions and permission timelines.
Local conditions
Producing LED wall rental in Siliguri
Weather & the rig
LED panels are the first thing a climate punishes — humidity creeps into ribbon cables, direct sun washes out anything under 5,000 nits, and wind load on a flown wall rises fast with height and surface area. Three distinct hazards. Jun–Sep brings Himalayan foothill rain of 2,500 mm-plus with the Mahananda and Teesta running high and Sevoke Road waterlogging. Nov–Jan brings dense Dooars fog that closes Bagdogra for hours and destroys any projection or aerial plan. Worst for a build is Apr–May, when Kalbaishakhi squall lines arrive off the plains with twenty minutes' warning and 60–70 km/h gusts — the single biggest cause of collapsed outdoor structures in north Bengal. Jun–Sep monsoon with its landslide closures on the hill routes; and Apr–May squall season for any outdoor build without a wind plan.
Power & redundancy
A large LED canvas draws several hundred watts per square metre at peak and spikes on white frames, so distribution is sized to the worst content frame rather than to an average. WBSEDCL supply has frequent short interruptions and noticeable voltage swing through the wholesale and Sevoke Road belt, so DG with automatic voltage regulation is standard and a stabiliser ahead of LED processors is sensible. Tea-garden and Dooars-edge venues are entirely generator-fed, with fuel carried in because the estate roads make a mid-show bowser run unrealistic.
Permits & noise rules
Flown scenic LED needs structural sign-off on point loads, and outdoor builds attract both wind-load scrutiny and, near residential frontage, light-spill objections. Siliguri Municipal Corporation for the licence and temporary-structure permission, the Siliguri Police Commissionerate for the public-performance and loudspeaker licence, and West Bengal Pollution Control Board noise rules with the 10 pm outdoor limit — Bengal's enforcement spikes around Kali Puja and Diwali, when the sound-box crackdown is active and genuine. Bagdogra is a civil enclave on an Air Force base 13 km out, which effectively closes drone operations. International-border proximity means the district administration expects intimation for any large gathering.
Load-in & access
Panel cases are heavy, numerous and must arrive in build order, so dock height, lift capacity and the available load-in window set how much surface can realistically go up. Siliguri is unusually easy to supply for its size because NJP railhead and Bagdogra air cargo both work — Kolkata is 560 km and 11–12 hours, so heavy LED and truss generally rail or fly rather than drive. Onward hill work is the hard part: NH-10 along the Teesta towards Kalimpong and Gangtok has landslide closures and a practical vehicle-length limit, and the Darjeeling road needs small trucks and tempo travellers only. Plan a transfer at Siliguri rather than a through-run.
Season & booking
Durga Puja and Kali Puja in Sep–Oct are absolute — every sound box, dimmer, truss span and technician in the district is committed to pandals for a fortnight, and anything else booked in that window will not be serviced. The Christmas–New Year hill-tourist peak locks accommodation and vehicles. Add the Teesta Tea and Tourism Festival, Saraswati Puja in Jan–Feb, and the Bengali wedding dates clustered in Agrahayan and Magh. Peak demand runs Oct–Mar.
Crew & dispatch
Local crew with working stock in Siliguri; large-format LED and specialist inventory railed to NJP or flown into Bagdogra from Kolkata rather than driven, with at least 48 hours in hand for the handover. Load-in support covers Matigara, Pradhan Nagar and the rest of the city.
What it costs here
Trading-family weddings pay well for visible spend — stage, floral, LED and entry — and negotiate hard on crew days and infrastructure. Tea-industry and corporate roadshow work is modest in value but reliably repeating across a season. The cost of getting gear here at all has to sit honestly in the quote, because freight and the hill transfer are not absorbable.
Local expectations
A genuinely mixed market — Marwari weddings run a long multi-day sequence with sangeet at full volume, Bengali weddings keep the shehnai, conch and uludhwani in acoustic space, and both expect the curfew honoured because Bengal police act on it. Pandal work answers to a puja committee, so the plan is presented to a room. Bengali and Hindi announcements with Nepali recognised in the hill-adjacent crowd.
Specification
LED Wall Rental: technical specification
| Specification | Detail |
|---|---|
| Pixel pitch range | P1.9 – P4.8 indoor, P4.8 – P10 outdoor |
| Viewing distance rule | Minimum comfortable distance in metres ≈ pixel pitch in mm |
| Brightness | 800 – 1,500 nits indoor, 5,000 – 7,500 nits outdoor daylight |
| Panel refresh for camera | 3,840 Hz or higher, with ShutterSync and genlock on Brompton |
| Processing | Novastar MCTRL4K / VX1000, Brompton Tessera SX40 with Hydra calibration |
| Ingress protection | IP43 indoor cabinets, IP65 front and rear for outdoor builds |
| Power draw | Approximately 150 – 350 W per square metre average, peaks higher on white |
| Geometry | Flat, curved, corner, cube, floor-rated, transparent mesh and kinetic builds |
| Rigging | Flown on certified motors with point-load report, or ground-stacked on goalpost frames |
| Spares carried | Five per cent spare panels plus receiving cards, PSUs and ribbon cables |
Creative geometry is where scenic LED earns its budget. Curved and corner builds, suspended cubes, floor tiles rated for foot traffic, transparent mesh over a set and kinetic panels on winches all come from the same panel families but each changes the rigging and the power plan. A flown wall needs a point-load calculation and a wind-load assessment outdoors, because a solid LED surface is effectively a sail and the load rises steeply with height and area. Cable dressing matters too: data and power loop through panels in a defined order, and a single ribbon cable creeping out of its socket in humidity takes out a column.
Sizing
What size rig does your event actually need?
| Scale | Guests | Recommended setup |
|---|---|---|
| Panel backdrop | 100 – 400 | 6 m x 3 m at P3.9, ground-stacked, single processor, 18 sq m |
| Stage width wall | 400 – 1,500 | 10 m x 5 m at P2.6 or P3.9, flown, Brompton with ShutterSync, 50 sq m |
| Wrapped stage design | 1,500 – 5,000 | Main plus side panels and a floor section, 120 – 180 sq m, media server playback |
| Immersive room | 200 – 800 | Three-wall plus floor at P2.6, edge-matched, 250 sq m, calibrated as one canvas |
| Festival scenic | 10,000+ | Outdoor IP65 at P4.8 – P6.9, 300 sq m+, wind-load assessed, redundant power |
Scope
LED Wall Rental scope tiers in Siliguri
Backdrop Canvas
Conferences and award stages, up to 40 sq m of surface
- P2.6 or P3.9 indoor panels on a ground-stacked goalpost
- Novastar processing with native-resolution canvas mapping
- Content playback with one operator and a hot backup machine
- Five per cent spare panels and consumables on site
- LED technician plus one rigger for the build
Scenic Build
Launches, concerts and award nights, 50 – 180 sq m with shaped geometry
- Curved, corner or multi-surface build with flown sections
- Brompton processing with ShutterSync and genlock for cameras
- disguise or Resolume media server with timecoded playback
- Point-load report and certified rigging
- Two LED technicians, a media server operator and a rigging crew
Immersive Surface
Large stage designs and immersive rooms, 200 sq m and above
- Multi-plane design with floor LED, cubes and kinetic elements
- Redundant processing with hot-standby servers and dual data paths
- Full panel calibration pass for colour and brightness uniformity
- Content pipeline support with pixel maps issued to your studio
- Full-time crew across build, show days and strike
Trading-family weddings pay well for visible spend — stage, floral, LED and entry — and negotiate hard on crew days and infrastructure. Tea-industry and corporate roadshow work is modest in value but reliably repeating across a season. The cost of getting gear here at all has to sit honestly in the quote, because freight and the hill transfer are not absorbable.
Venues
Where we work in Siliguri
| Venue | Capacity | Production note |
|---|---|---|
| Cinnamon Siliguri | Up to 900 seated across banquet halls | Sevoke Road property with a workable approach but no real dock — unloading happens on the service side of a busy arterial, and the hall's beam-to-slab gap keeps the lighting trim low. |
| Kanchenjunga Stadium | 20,000-plus with the field in use | The city's main large-crowd venue, right in the centre: no permanent rigging, turf and track protection needed before any vehicle crosses, a single usable service gate, and a surrounding commercial block where the approach jams solid by 9 am. |
| Mayfair Siliguri | Up to 800 across ballroom and lawns | Resort-format property on the Matigara side with lawn space and parking; the open lawn is exposed to the pre-monsoon squall line, so anything tall here needs guying and a wind-abort trigger written into the plan. |
| Sinclairs Siliguri | Up to 500 seated across halls | Established Pradhan Nagar hotel sized for conferences and mid-scale receptions; load-in is lift-based from a tight forecourt and parking is the practical limit on how many vehicles can be on site at once. |
| Tea-garden and Dooars-edge venues | 300–1,500 depending on the estate | The estate bungalow-and-lawn settings that destination clients ask for sit outside the municipal supply area entirely, so they are DG-only, the estate roads will not take a heavy truck after rain, and the Forest Department takes an interest wherever the plot abuts an elephant corridor. |
Crew
Who turns up on show day
- LED technician
Builds the panel grid, maps the canvas to native resolution and chases any dead panel, card or ribbon on sight.
- Media server operator
Runs disguise or Resolume, holds the content timeline against timecode and keeps a hot backup machine mirrored.
- Rigger
Flies the sections, checks point loads against the report and manages any kinetic or winch elements.
- Video engineer
Owns processing, refresh rate, ShutterSync and genlock so the wall behaves correctly on every camera.
- Content technician
Conforms incoming content to the pixel map, fixes aspect and colour issues and version-controls what plays.
What you receive
- Pixel map with native canvas resolution, aspect ratio and safe areas
- Panel grid drawing with data and power loop order
- Point-load report and, outdoors, a wind-load assessment
- Processor configuration record including refresh, ShutterSync and genlock settings
- Brightness and colour calibration report across the surface
- Content playlist with timecode cues and a backup on two drives
- Spares inventory log and a record of any panel swapped during the run
Timeline
From enquiry to load-out
- T-5 weeks
Pitch and geometry decision
Nearest viewing distance, camera plan and content type set the pixel pitch and the panel grid.
- T-4 weeks
Pixel map issue
Your content studio receives the exact canvas resolution, aspect and safe areas so nothing is authored to be scaled.
- T-2 weeks
Rigging and power sign-off
Point-load report, wind-load assessment for outdoor builds and the power schedule go to the venue.
- Show day −2 to −1
Build and calibration
Panels built, data and power looped, canvas mapped, then a brightness and colour calibration pass across the surface.
- Show day −1
Camera check
Refresh, ShutterSync and genlock verified live through the actual cameras, with content on screen.
- Show day to +6 hours
Show and strike
Operated through the show with spares on hand, then de-rigged panel by panel into cases in build order.
Risk control
What goes wrong, and how we stop it
What can go wrong
How we prevent it
- What can go wrong
Humidity works a ribbon cable loose and a column of panels goes dark mid-show.
How we prevent itCables are dressed and strain-relieved at build, connections are reseated after the first full power cycle, and five per cent spare panels and cards are on site.
- What can go wrong
An outdoor flown wall becomes a sail and the wind load exceeds the structure's rating.
How we prevent itA wind-load assessment is run against panel area and trim height, with a documented wind speed at which the wall is lowered or the show pauses.
- What can go wrong
The front row sits three metres from a P4.8 panel and sees pixels rather than an image.
How we prevent itPitch is chosen from the real nearest-audience distance, and where seating cannot move we specify a finer pitch for the lower sections only.
- What can go wrong
Average power is calculated from the spec sheet and the breaker trips on a full-white frame.
How we prevent itDistribution is sized for peak draw on white content, not average, with phases balanced across the panel grid and content peak-limited where sensible.
Honest comparison
Is this the right choice for your event?
- Projection instead of LED for a stage backdropOur verdict
Projection is far cheaper per square metre for very large surfaces and looks beautiful on texture. LED wins whenever there is ambient light, a camera, or performers who would walk through a projector beam.
- A coarser pixel pitch to save budgetOur verdict
Often the right call. If the nearest viewer is eight metres away and the content is graphics rather than text, P4.8 looks identical to P2.6 at a fraction of the cost. It only fails when a camera pushes in.
- Ground-stacking instead of flying the wallOur verdict
Ground stacks are cheaper, faster and avoid a rigging sign-off. The trade-off is a visible frame, a higher bottom edge and lost stage depth, which matters on a set but not behind a lectern.
Demand
What Siliguri books most
Siliguri event mix
- Marwari and Bengali trading-family weddings
- Durga Puja pandal sound and lighting across the Hill Cart Road wards
- Tea-industry buyer, dealer and auction-circuit events
- Northeast-bound corporate roadshows and dealer meets
- Regional political rallies and civic functions
- School, college and inter-school cultural functions
Ideal for
Events we power with LED wall rental in Siliguri
Process
From brief to standing ovation
01
Brief & recce
We visit the venue, map power and rigging, and understand your show flow.
02
Design & quote
CAD plans, 3D previews and an itemised quote within 24 hours.
03
Build & rehearse
Load-in, system tuning, content checks and full technical rehearsal.
04
Show & strike
Show-caller-led execution, then a quick, clean load-out.
FAQ
LED Wall Rental in Siliguri: FAQs
More services in Siliguri
LED Wall Rental in nearby cities
Areas we cover in Siliguri
Events in Siliguri