Who should own this checklist?

One person on your side and one on the production side. Shared ownership of a pre-show checklist is how items quietly go unconfirmed — assign it to a named individual with authority to escalate.

When should each item be confirmed?

Equipment and crew at booking, power and rigging after the recce, timings two weeks out, and content 72 hours before. Anything still open 48 hours out should be treated as a risk, not an action.

Why does colour rendering matter so much for wedding lighting?

Because the film is what survives. The colour rendering index describes how faithfully a source reproduces colour against a reference, and inexpensive LED fixtures often score respectably overall while failing badly on R9, the deep-red value that skin tone depends on. Under those fixtures faces grade grey and gold jewellery looks flat. We specify above Ra 90 with R9 verified for anything that lights a person.

How do you match the lighting to our decor palette?

With physical material, not screenshots. A fixture mixes a dusty rose or a deep maroon differently from the way a monitor displays it, so we test actual swatches and floral stems under the actual fixtures weeks beforehand, record the exact setting on a colour reference sheet, then set the rig against those samples again at focus once the room is dressed.

Can you light a heritage venue that will not allow any cabling?

That is precisely what battery fixtures on wireless DMX exist for. Uplighters and tubes stand free, need no mains and no data cable, and respond to the same console as the rest of the rig. The real planning is runtime: we measure it at the output we intend to programme, plan a charge rotation, and place units so one can be swapped without disturbing the decor.

Should lighting be designed separately for each function?

Yes, because each is a different problem. Mehendi is usually daytime and wants fixtures balanced to the ambient daylight rather than fighting it. Haldi is bright and informal. Sangeet is a show with cues and movement. The pheras want low, warm, intimate light with the couple keyed and little else. The reception needs clean, flattering key on the receiving line, where every guest is photographed.

Wedding Lighting Design Checklist: What to Confirm Before Show Day

Category: Checklists
Read time: 7 min
Sections: 3
Updated: Sept 2026

Key takeaway

Before show day, confirm the wedding lighting design equipment list with exact model numbers, the spares that travel with it, sanctioned power and generator changeover, rigging sign-off, named crew, the load-in and rehearsal slots, final content files and a single named show-caller. Missing any one of these causes most event AV failures.

Key takeaways

Exact models, not categories, on the equipment list
Spares for anything that would stop the show
Power sanction plus generator changeover confirmed
One named show-caller holding the cue sheet

Wedding Lighting Design: pre-show checklist

Equipment & specification

Colour rendering confirmed: Ra above 90 with R9 deep-red verified on every fixture that lights a face
Colour temperature confirmed: One white point per function, typically 2,700 – 3,200 K for pheras and reception
Key light for camera confirmed: Faces keyed so the cinematographer can stop down rather than shoot wide open
Decor matching confirmed: Fixtures set against physical fabric and floral samples at focus, never against hex values
Battery fixtures confirmed: Wireless-DMX uplighters and tubes with runtime measured at the programmed output
Itemised list naming exact models, not categories
Spares for mics, cables, processors and any single point of failure

Power & safety

Venue sanctioned load confirmed in writing against the rig's draw
Silent generator sized with automatic changeover
Earthing check completed and logged
Rigging certification and load calculations signed off
Cable covers on every walkway and crowd line

People

Lighting designer named and briefed
Programmer and operator named and briefed
Focus and colour technician named and briefed
Battery fixture technician named and briefed
Camera-side gaffer named and briefed
Rigging and cable crew named and briefed

Timings

Load-in slot agreed with the venue in writing
Sound check and line check scheduled
Full technical rehearsal booked with real presenters and real content
Venue curfew and strike window confirmed

Content & handover

Lighting plot per function, drawn over the decorator's layout
Colour reference sheet naming the fixture setting matched to each fabric and floral sample
Previsualisation renders of the key looks for every function
Cue list per function mapped to the running order with fade times
All video, audio and slides delivered 72 hours ahead in the agreed format

What this checklist is protecting you from

What can go wrong

How we prevent it

What can go wrong
The room looks beautiful to the eye and the wedding film comes back with grey, sallow skin tones.
How we prevent it
Fixtures lighting faces are specified above Ra 90 with the R9 value verified, one white point is locked per function, and the look is reviewed on the film team's own monitor at rehearsal rather than trusted to the eye.
What can go wrong
A saturated decor colour is matched from a hex code and the uplighters render it as a visibly different shade on the night.
How we prevent it
Physical fabric and floral samples are requested weeks ahead, tested under the actual fixtures, and the resulting setting is recorded on a colour reference sheet so focus is repeatable across every function.
What can go wrong
Battery uplighters buried inside floral structures die partway through the reception.
How we prevent it
Runtime is measured at the output level actually programmed rather than taken from the datasheet, a charge rotation is planned per day, and decor positions are built so a unit can be swapped without dismantling the arrangement.
What can go wrong
The pheras are lit to a level that suits the cameras and destroys the intimacy of the ceremony.
How we prevent it
Ceremony looks are designed low and warm with tight pin spots on the couple and the fire instead of a flat wash, and the film team is briefed to bring faster glass or a discreet practical rather than asking for the mandap to be lifted.
What can go wrong
Heritage venue management refuses fixings, cable routes or ground positions hours before the function.
How we prevent it
Permission for every fixing, cable route and free-standing position is confirmed in writing at the recce, and the design carries a fully wireless, free-standing alternative for each decor position.
What can go wrong
Decor dresses the room after the rig has been focused and half the fixtures now point at a drape.
How we prevent it
Focus is scheduled as a named slot after decor dressing rather than before it, and the plot marks which positions must stay accessible for the re-focus pass.

Want this tailored to your event?

Get an itemised quote from Prime AV Solutions within 24 hours — call +91 93093 80958 or WhatsApp our producers.

Published 12 September 2026 by the Prime AV Solutions production team.

FAQ

Wedding Lighting Design Checklist: What to Confirm Before Show Day: FAQs

More Checklists

Event Production Checklist: What to Confirm Before Show Day Questions to Ask Before Hiring a Event Production Company Questions to Ask Before Hiring a Wedding Lighting Design Company Concert Sound Systems Checklist: What to Confirm Before Show Day Questions to Ask Before Hiring a Concert Sound Systems Company Line Array Systems Checklist: What to Confirm Before Show Day Questions to Ask Before Hiring a Line Array Systems Company Wedding Sound & Lighting Checklist: What to Confirm Before Show Day