Which Mysuru venues do you work at?

Mysore Palace (Thousands across the forecourt and surrounding grounds in a Dasara layout); Radisson Blu Plaza Mysore (Around 1,000 in the ballroom, 1,600 with lawn); Lalitha Mahal Palace (500–900 across the hall and terraces). A protected heritage monument under the palace board, famous for an illumination scheme of nearly a lakh bulbs — no fixings anywhere, structures held well off the facade, and your lighting design has to coexist with a house illumination you cannot switch off. We also cover hotels, farmhouses and open grounds across Vijayanagar, Jayalakshmipuram, Hebbal, Kuvempunagar, Nazarbad.

How many lumens does my building need?

It depends on surface area, material reflectance and ambient light, not on size alone. As a planning figure we budget roughly 250 to 400 lumens per square metre of lit surface for a reasonably dark site on light stone, which puts a 400 square metre façade at 100,000 lumens or more. Dark granite and nearby street lighting both push that figure up sharply.

How long does the content take to produce?

Five to seven weeks for a three to five minute façade show, from storyboard through animatic to final render with sound design. The clock cannot start until the projector study is signed off, because the animation is authored onto the specific geometry and camera positions, so an early survey is what protects the schedule.

Can you map onto a heritage monument?

Technically yes, and we do. Practically it requires permission from the site authority, a no-touch approach where nothing is fixed to the structure, projectors positioned on ballasted free-standing towers, and usually restrictions on show hours and sound level. That permission file is the long lead item, not the content.

Why does alignment have to happen at night?

Because you cannot see the projected image well enough to warp it in daylight. A multi-projector façade takes four to eight hours of night work to warp, blend and mask properly, which is why we ask for two nights before the technical rehearsal rather than one.

Spectacle · Mysuru, Karnataka

3D Projection Mapping in Mysuru

Mysuru's event economy has two distinct halves: the Dasara machine, where the palace, the city corporation and the state government run a ten-day production at civic scale, and a year-round corporate flow from the technology campuses on the Hebbal industrial side, plus the yoga and wellness tourism that fills the shoulder seasons. Heritage-venue weddings at the palace-era properties sit on top. Prime AV Solutions supplies the 3D projection mapping behind those events — designed on paper, proven in rehearsal and run by our own crew.

WhatsApp a producer

Rated 4.9/5 by 600+ event planners and brands

Lead time: From 10 weeks
Peak season: Sep–Feb
Coverage: Mysuru & Karnataka

Key takeaway

3D Projection Mapping in Mysuru is quoted against your guest count, venue and run of show. Two price worlds. Dasara and civic work is tendered through the district administration at government rates with slow payment cycles but large volumes. Corporate work from the technology campuses buys at Bengaluru benchmarks because the procurement sits in Bengaluru, which makes it the most attractive segment; heritage weddings pay a premium for careful, damage-free handling. Dasara — Nada Habba — runs ten days across late September and October, culminating in the Jamboo Savari procession and the Bannimantap torchlight parade, and absorbs effectively all staging, barricading, lighting and generator capacity in the district for a month either side. The Mysuru literature and classical festivals take winter dates, Ugadi and Varamahalakshmi shape wedding timing, and the technology campuses schedule offsites in the dry January–March stretch — so we quote within 24 hours and hold dates first-come.

3D Projection Mapping for Mysuru’s biggest events

Projection mapping starts with a survey, not a storyboard. We photogrammetry-scan or LiDAR-measure the surface — a façade, a stage set, a car, a cake — and build a 3D model that matches the real object within a few centimetres. The projectors are then positioned virtually against that model to check throw ratio, keystone, shadowing from balconies or trees, and whether any part of the surface falls outside the beam. Only once the projector positions are fixed does content production begin, because a mapped animation is authored against a specific camera position and cannot simply be moved later.

The surface is the instrument here — its material, reflectance, depth and the audience's viewing axis decide projector count, angles and whether the illusion reads at all. In Mysuru that plays out at venues like Mysore Palace, Radisson Blu Plaza Mysore, Lalitha Mahal Palace, and across Vijayanagar, Jayalakshmipuram, Hebbal, Kuvempunagar.

Brightness is the engineering constraint that decides the budget. Perceived image brightness depends on lumens, surface area, the reflectance of the material and the ambient light falling on it. Stone and painted plaster reflect perhaps 20 to 35 per cent of what hits them; dark stone far less. A heritage façade of 400 square metres with street lighting nearby can need 100,000 lumens or more in total, which is three or four stacked 30K-class laser projectors per angle. Laser phosphor sources are the standard now because they hold brightness and colour across a run, start instantly and tolerate the dust and heat of an outdoor build far better than lamps.

What’s included

20K–40K lumen laser projectors
Custom 3D content & storyboards
Edge blending & warping (Pixera, Disguise)
Heritage façades, cars, cakes & stages

Equipment we carry

BarcoChristiePanasonicEpsondisguiseAV Stumpfl PixeraDataton WatchoutResolume

Why Mysuru chooses Prime AV

Crews and trucks positioned for fast load-in at Mysore Palace and venues in Vijayanagar and Jayalakshmipuram.
The calculation includes measured surface reflectance, not an assumed figure, and a test projection on the actual material is done at survey wherever access allows.
3D geometry model of the mapped surface with the UV layout
Working knowledge of Karnataka venue rules, power sanctions and permission timelines.

Local conditions

Producing 3D projection mapping in Mysuru

Weather & the rig

Mapping is defeated by air as much as by rain — haze, dust and humidity scatter the beam and soften a blend, so brightness headroom is specified against local conditions. At around 760 m on the Deccan plateau, Mysuru has the gentlest climate in this set — rarely above 36°C even in April, with cool 16–18°C winter nights. The catch is the rain: the south-west monsoon from June to September and a secondary north-east spell in October–November mean Dasara itself routinely runs under showers, so every outdoor build in the festival window needs weather cover engineered in rather than added later. Monsoon humidity is high enough to matter for stored optics and for outdoor LED cabinet sealing. June–September is the main monsoon and October carries north-east showers that regularly interrupt Dasara. The reliable dry stretch is December to March; September–October is workable only with a committed wet-weather plan.

Power & redundancy

Stacked 30K-class projectors each draw several kilowatts continuously for the whole run, so projection needs a dedicated, stable, uninterrupted supply rather than a share of the event distribution. CESC supply in Mysuru is among the steadier distribution networks in Karnataka and the city invests in reliability ahead of Dasara. Hotel sanctioned loads are decent for the city's size, but palace and civic heritage venues release almost nothing for event use, so generators sited well away from the monument are the norm — and during Dasara the municipal load for the illumination itself takes priority, which is worth confirming before planning a mains tie-in.

Permits & noise rules

Mapping a building means permission to light it, towers on public or heritage ground, and usually a negotiated blackout of nearby street lighting for the show window. Dasara work routes through the Deputy Commissioner's Dasara committee and the Mysuru City Corporation, with the palace itself under its board's control and heritage conditions on any structure, fixing or heat source near the building. Mysuru City Police license assembly and manage the procession route. The Karnataka noise rules and the 10 pm limit apply, with tighter practical restraint in the Nazarbad and palace-adjacent residential areas. Drone flights over the palace and procession are generally refused on security grounds during the festival and need DGCA plus district clearance at any other time.

Load-in & access

Projector towers, ballast and enclosures have to be placed on a precise viewing axis that is often a road or a public plaza, so access and closures drive the build plan. The city is easy to reach on the Bengaluru–Mysuru expressway, but the heritage core is the problem: Sayyaji Rao Road, the palace circumference and the Devaraja Market area are congested all day and closed off entirely during Dasara, so festival builds happen in police-allotted night windows with vehicles cleared before dawn. The palace forecourt takes no vehicles at all beyond the gates, which makes every heavy case a trolley job.

Season & booking

Dasara — Nada Habba — runs ten days across late September and October, culminating in the Jamboo Savari procession and the Bannimantap torchlight parade, and absorbs effectively all staging, barricading, lighting and generator capacity in the district for a month either side. The Mysuru literature and classical festivals take winter dates, Ugadi and Varamahalakshmi shape wedding timing, and the technology campuses schedule offsites in the dry January–March stretch. Peak demand runs Sep–Feb.

Crew & dispatch

Run out of our Bengaluru depot, 145 km on the Mysuru expressway at roughly two and a half hours each way, which makes same-day crew rotation practical; for Dasara we pre-position inventory in Mysuru weeks ahead because road and storage access vanish once the festival build starts. Load-in support covers Vijayanagar, Jayalakshmipuram and the rest of the city.

What it costs here

Two price worlds. Dasara and civic work is tendered through the district administration at government rates with slow payment cycles but large volumes. Corporate work from the technology campuses buys at Bengaluru benchmarks because the procurement sits in Bengaluru, which makes it the most attractive segment; heritage weddings pay a premium for careful, damage-free handling.

Local expectations

Mysuru taste is conservative and heritage-conscious — clients genuinely dislike anything that looks temporary or garish against the architecture, so warm, restrained lighting and concealed structure read as quality here. Carnatic and Bharatanatyam programming expects acoustically honest reinforcement and accurate stage monitoring, Kannada content must be correctly typeset, and Dasara presentations are watched by a civic audience with firm opinions about how the palace should look.

Specification

3D Projection Mapping: technical specification

Typical 3D projection mapping specification supplied in Mysuru.
Specification	Detail
Projector class	20,000 – 40,000 ANSI lumens, laser phosphor or RGB laser, 3-chip DLP
Surface reflectance assumption	20 – 35 per cent for stone and painted plaster, lower for dark granite
Typical façade budget	Approximately 250 – 400 lumens per square metre of lit surface, ambient dependent
Blend overlap	10 – 20 per cent soft-edge between adjacent projectors
Media servers	disguise gx/vx, AV Stumpfl Pixera, Dataton Watchout
Survey method	Photogrammetry or LiDAR scan to a 3D model accurate within a few centimetres
Alignment window	Night-time only, four to eight hours for a multi-projector façade
Content pipeline	Cinema 4D or Blender to UV-mapped render, delivered as image sequence
Show length	3 – 12 minutes, usually looped with timecoded audio
Weather protection	IP-rated projector enclosures with filtered forced-air cooling for outdoor runs

On site, the work is warping, blending and masking. Each projector's output is warped onto the surface geometry using a media server — disguise, Pixera or Watchout — with overlap regions of 10 to 20 per cent soft-edge blended so no seam is visible. Masks cut the beam off windows, balconies and anything that must stay dark. Alignment is done at night with the actual content and takes hours, not minutes, and it must be re-checked if a projector is bumped or a tower settles. We lock projector positions with ballasted towers and mark every position so a knocked unit can be returned to alignment rather than re-mapped.

Sizing

What size rig does your event actually need?

Scale	Guests	Recommended setup
Single object	50 – 300	One object, 2 x 20K projectors, 10 – 30 sq m, 60 – 90 seconds of content
Stage set	300 – 1,500	Set faces plus floor, 4 x 20K, 50 – 120 sq m, blended and masked to scenic edges
Hotel façade	500 – 2,000	6 x 30K from two angles, 250 – 400 sq m, three-minute show, ballasted towers
Palace or fort wall	2,000 – 10,000	10 – 14 x 30K from three angles, 500 – 800 sq m, five-minute narrative, multi-night
Monument spectacle	10,000+	20+ projectors, 1,000 sq m+, redundant servers, nightly alignment, licensed site

Scope

3D Projection Mapping scope tiers in Mysuru

Object & Stage Mapping

Product reveals, car launches, cakes and set pieces up to 60 sq m

3D scan of the object and a matched virtual projector study
Two to four 20K-class projectors with blending and masking
60 to 120 seconds of bespoke animation to the reveal beat
Pixera or Watchout playback with timecoded audio
Mapping technician, media server operator and a content artist

Most booked

Façade Show

Heritage buildings, hotel and palace façades, 200 – 600 sq m

Photogrammetry survey and full geometry model of the building
Six to twelve 30K-class laser projectors on ballasted towers
Three to six minutes of custom 3D content with sound design
Night alignment across multiple sessions with masking of windows
Projection crew, riggers, server operator and content studio time

Large-Scale Spectacle

City festivals, monuments and multi-surface installations, 800 sq m and above

Multi-angle design covering several surfaces as one canvas
Twenty-plus projectors with redundant servers and hot spares
Full narrative content production with score and voiceover
Weather-rated enclosures and a multi-night run with nightly re-alignment
Full crew across survey, build, alignment, show run and strike

Venues

Where we work in Mysuru

Venue	Capacity	Production note
Mysore Palace	Thousands across the forecourt and surrounding grounds in a Dasara layout	A protected heritage monument under the palace board, famous for an illumination scheme of nearly a lakh bulbs — no fixings anywhere, structures held well off the facade, and your lighting design has to coexist with a house illumination you cannot switch off.
Radisson Blu Plaza Mysore	Around 1,000 in the ballroom, 1,600 with lawn	The most practical large indoor option, with a usable dock, but the ballroom grid is conference-rated and the property's residential neighbours make late-night outdoor sound a problem.
Lalitha Mahal Palace	500–900 across the hall and terraces	A state-run heritage hotel with a grand central hall whose marble and plaster surfaces make it acoustically brutal; the sweeping entrance staircase is the only practical route in, so case sizes have to be planned around it.
Jaganmohan Palace and the Town Hall precinct	600–1,500 seated or standing	Heritage civic buildings where temporary structures need both corporation and heritage-cell clearance, and vehicle access is through congested Sayyaji Rao Road.
Bannimantap and the Dasara procession grounds	Tens of thousands along the route and at the torchlight parade ground	Public ground used under district-administration control during Dasara, with police-dictated barricading lines, elephant movement corridors to keep clear, and cable routes that must survive crowd and animal traffic.

Crew

Who turns up on show day

Mapping technician
Builds the geometry model, warps each projector to the surface and maintains alignment across the run.
Media server operator
Runs disguise, Pixera or Watchout, holds the show timeline to timecode and keeps a mirrored backup server.
Content artist
Authors the animation against the UV-mapped geometry so it reads correctly from the audience viewing position.
Projector technician
Rigs, powers, focuses and cools each unit, monitors lamp or laser hours and swaps a failed unit without losing alignment.
Rigger
Builds and ballasts the projector towers, secures positions against wind and marks them for repeatable realignment.

What you receive

3D geometry model of the mapped surface with the UV layout
Projector placement study with throw, brightness and coverage calculations
Master render of the show content at delivery resolution
Media server show file with timecode cues and a mirrored backup
Masking map showing every excluded window, balcony and dark zone
Audio stem and mixed show track used for synchronisation
Full-length video capture of the show as performed from the audience position

Timeline

From enquiry to load-out

T-10 weeks
Site survey and scan
Photogrammetry or LiDAR capture of the surface, plus ambient light readings taken at the intended show hour.
T-8 weeks
Projector study and sign-off
Virtual projector placement, brightness calculation and tower positions agreed with the venue and the authority.
T-7 to T-2 weeks
Content production
Storyboard, animatic review, then full 3D render against the UV map with sound design and score.
Show day −3 to −2
Build and first alignment
Towers built and ballasted, projectors rigged, first night of warping, blending and masking.
Show day −1
Technical rehearsal
Full show run at the actual hour, content reviewed from the audience position, and corrections rendered overnight.
Show day to +2 days
Show run and strike
Nightly runs with a pre-show alignment check, then strike with projectors cased and towers de-ballasted.

Risk control

What goes wrong, and how we stop it

What can go wrong

How we prevent it

What can go wrong
Brightness is calculated from lumens alone and the dark stone façade swallows the image.
How we prevent it
The calculation includes measured surface reflectance, not an assumed figure, and a test projection on the actual material is done at survey wherever access allows.
What can go wrong
The audience ends up standing off the designed viewing axis and the 3D illusion collapses.
How we prevent it
The viewing position is part of the design and is barricaded or seated on site, with content checked from the extreme left and right of the intended crowd area.
What can go wrong
Street lighting or a neighbouring building's floodlights wash the façade and the show looks grey.
How we prevent it
Ambient readings are taken at the show hour during the survey, and the blackout of specific street and site lights is negotiated and written into the permission before content is budgeted.
What can go wrong
Content is authored before projector positions are fixed, so the animation does not sit on the geometry.
How we prevent it
Content production does not begin until the projector study is signed off, because the mapping is authored against those exact camera positions.

Honest comparison

Is this the right choice for your event?

LED wall instead of projection mapping
Our verdict
LED beats projection on brightness, on reliability and in any lit environment. But it cannot map onto an existing building, a car or a cake, and at 400 square metres of heritage façade it is simply unaffordable. If the surface is the story, map it; if you need a rectangle that works in daylight, use LED.
Stock content instead of bespoke animation
Our verdict
Stock loops and generative visuals genuinely work for ambient architectural washes and for leaner budgets. They cannot do a reveal, a narrative or anything that respects the building's actual architecture, because they are not authored to your geometry.
Fewer, brighter projectors instead of more units
Our verdict
Fewer angles means fewer blends and a faster alignment, which is the right trade on a flat surface. Any building with depth, recesses or wings needs multiple angles regardless of total lumens, or the recesses stay dark.

Demand

What Mysuru books most

Mysuru event mix

Dasara civic and cultural programming
Corporate offsites, training and town halls from the technology campuses
Heritage-property weddings and receptions
Yoga, wellness and academic conferences
Classical music and dance festivals
School and university annual days and convocations

Ideal for

Events we power with 3D projection mapping in Mysuru

Product launches

Wedding façades

Brand & city festivals

Process

From brief to standing ovation

Brief & recce

We visit the venue, map power and rigging, and understand your show flow.

Design & quote

CAD plans, 3D previews and an itemised quote within 24 hours.

Build & rehearse

Load-in, system tuning, content checks and full technical rehearsal.

Show & strike

Show-caller-led execution, then a quick, clean load-out.

FAQ