Which Aligarh venues do you work at?

AMU Kennedy Hall (Around 1,200 seated in the hall, with lawn overflow); Hotel Grand Shivaay (500–900 across hall and lawn); Ramghat Road lawns (800–2,500 across the lawn and marriage-hall belt). A colonial-era university auditorium: a fixed stage, a low grid with no usable rigging capacity, and a reverberant masonry shell that demands a point-source design with delays rather than a large flown system. Every element needs the university's proctorial and engineering office clearance. We also cover hotels, farmhouses and open grounds across Ramghat Road, Civil Lines, Marris Road, Sasni Gate, Quarsi.

Can you take a feed from our cameras?

Yes, that is the normal arrangement. Camera outputs feed the vision switcher, which produces the IMAG programme cut alongside separate outputs for the screens, the stage confidence monitors and the stream, each scaled independently so a change to one does not disturb another.

Will the screen be visible in daylight?

Only if it is specified for it. Daylight positions need 5,000 nits minimum and 7,500 in direct sun, and we check the sun path across the actual show hours during the site survey. An indoor-brightness screen placed outdoors cannot be fixed by processing or by turning it up.

What format should presenters send their slides in?

16:9 at 1920 x 1080 or higher, with a generous safe title area, minimum 24 pt body text and no critical content in the outer five per cent. We issue these standards two weeks out and still reformat decks on the day, because a slide nobody can read is worse than no slide.

How quickly can a mobile LED screen be set up?

A trailer-mounted daylight screen typically deploys hydraulically in under two hours on a level, accessible pitch, including levelling, power-up and signal. That makes it the practical choice for single-day outdoor screenings and sites where there is nothing to rig from.

Visual · Aligarh, Uttar Pradesh

LED Screen Rental in Aligarh

Prime AV Solutions runs LED screen rental across Aligarh and the rest of Uttar Pradesh. Dispatched from our Delhi depot, 130 km via the Yamuna Expressway and NH-34 at about three hours, which makes same-day turnarounds genuinely possible; local labour and tent structure hired in Aligarh, with Agra 85 km away as the nearer source for additional staging. Every project is specified and quoted to its own brief.

WhatsApp a producer

Rated 4.9/5 by 600+ event planners and brands

Lead time: From 4 weeks
Peak season: Oct–Feb
Coverage: Aligarh & Uttar Pradesh

Key takeaway

LED Screen Rental in Aligarh is quoted against your guest count, venue and run of show. A low-price market with two exceptions. University work is budget-bound and procedurally slow, and tent-house competition keeps the wedding reference price very low. Export buyer meets, however, are judged by overseas visitors and the hardware exporters will spend to avoid embarrassment, and alumni endowment functions are funded by a diaspora with metro expectations. Sir Syed Day on 17 October is the fixed point of the academic year and the single biggest production date in the city, with alumni gatherings around it. AMU convocation, the examination season and summer vacation each close campus venues at predictable times. Ramzan, Eid and the Numaish-style winter trade fairs, plus the Nov–Feb wedding and walima run, fill the rest — so we quote within 24 hours and hold dates first-come.

LED Screen Rental for Aligarh’s biggest events

IMAG — image magnification — exists for one reason: so the person in row forty can read a face. The brief is visibility and legibility, not scenic design. Screen size comes from the furthest viewer: a usable rule is that text height on screen should be at least one fiftieth of the viewing distance for comfortable reading, which pushes side screens on a long ground to six metres wide and upward. Standard 16:9 formats are the right choice here, because content is a live camera cut and a presentation deck, both of which already live in that aspect and should never be letterboxed or stretched to fit a creative canvas.

IMAG lives or dies on sightlines, so balcony overhangs, lighting-rig positions and the shape of the seating decide where screens can hang and how many you need. In Aligarh that plays out at venues like AMU Kennedy Hall, Hotel Grand Shivaay, Ramghat Road lawns, and across Ramghat Road, Civil Lines, Marris Road, Sasni Gate.

Delay screens handle depth. Beyond roughly 70 to 80 metres from the stage, a main screen is too small to read regardless of how bright it is, so we place additional screens down the audience on their own structures. These need their own power, their own signal path — usually fibre or a long-haul SDI run rather than copper HDMI — and a decision about whether to delay the video to match the delayed audio at that position. For speech-led events we generally keep video aligned to the audio arriving at that spot, because lip-sync error reads as a fault far faster than absolute latency does.

What’s included

Side IMAG screens
Outdoor daylight-bright screens
Video switching & playback
Mobile LED trucks

Equipment we carry

AbsenUniluminBarcoNovastarRoland ProfessionalBlackmagic DesignAnalog Way

Why Aligarh chooses Prime AV

Crews and trucks positioned for fast load-in at AMU Strachey Hall and the Victoria Gate quadrangles and venues in Sasni Gate and Quarsi.
Mirrored machines are advanced together by the operator and tested with a live failover during rehearsal, not assumed to work.
Brightness and colour match record across all screen positions
Working knowledge of Uttar Pradesh venue rules, power sanctions and permission timelines.

Local conditions

Producing LED screen rental in Aligarh

Weather & the rig

An IMAG screen has to stay readable in whatever light the sky provides, so sun path across the actual show hours and the brightness specification are decided together. Western Uttar Pradesh extremes apply: a dusty, dry April to June reaching 43–45°C with pre-monsoon dust squalls that will tear an unballasted banner, a July–September monsoon that waterlogs the unsurfaced lawn venues, and a December–January cold wave with fog thick enough to delay a morning soundcheck and ruin an outdoor projection plan. The dust is the persistent engineering problem — filters, covers and cleaning schedules on every job. April–June heat and dust storms make outdoor work unviable, and July–September monsoon turns the lawn circuit to mud. The AMU examination and vacation calendar also closes campus venues for long stretches, so confirm academic dates before promising anything. October–March is the season.

Power & redundancy

Delay and outdoor screen positions sit far from the main distribution, each needing its own stable feed, which usually means a satellite generator rather than a long cable run. UPPCL supply is intermittent and the city's distribution network is overloaded, so generator provision is the default rather than the contingency. Campus venues run on university supply that is protected but not generous, and the lawn circuit draws from connections sized for lighting and nothing more. Expect to bring everything: two sets, a changeover panel, and an isolated feed for consoles and media servers.

Permits & noise rules

Large outdoor screens draw attention from traffic and nearby residents, so siting, mounting and light spill typically need clearance alongside the event permission itself. The Aligarh Nagar Nigam handles ground and pandal permissions, the district magistrate and senior superintendent of police license assembly, and the Uttar Pradesh noise rules with the 10 pm outdoor amplified-sound limit apply. Campus events are a separate and sometimes slower track through the AMU registrar and proctor, with student-body politics occasionally affecting approvals. There is no commercial airport here, which simplifies the drone question, but district permission and police intimation are still required and student gatherings attract additional scrutiny.

Load-in & access

Delay positions and mobile LED trucks need vehicle access deep into the audience area before the crowd arrives, which makes gate widths and ground conditions the real constraint. No airport and no expressway exit directly into the city, so everything arrives by road on NH-34 or across from the Yamuna Expressway, roughly three hours from Delhi. Inside the city, the Dodhpur, Marris Road and Centre Point stretches are slow all day and the old city around Shah Jamal is tempo-only. Campus load-in has to work around teaching hours and pedestrian routes, which in practice means an evening and overnight call.

Season & booking

Sir Syed Day on 17 October is the fixed point of the academic year and the single biggest production date in the city, with alumni gatherings around it. AMU convocation, the examination season and summer vacation each close campus venues at predictable times. Ramzan, Eid and the Numaish-style winter trade fairs, plus the Nov–Feb wedding and walima run, fill the rest. Peak demand runs Oct–Feb.

Crew & dispatch

Dispatched from our Delhi depot, 130 km via the Yamuna Expressway and NH-34 at about three hours, which makes same-day turnarounds genuinely possible; local labour and tent structure hired in Aligarh, with Agra 85 km away as the nearer source for additional staging. Load-in support covers Sasni Gate, Quarsi and the rest of the city.

What it costs here

A low-price market with two exceptions. University work is budget-bound and procedurally slow, and tent-house competition keeps the wedding reference price very low. Export buyer meets, however, are judged by overseas visitors and the hardware exporters will spend to avoid embarrassment, and alumni endowment functions are funded by a diaspora with metro expectations.

Local expectations

Campus ceremony here is formal and tradition-heavy: academic procession order, the university tarana, Urdu and English oratory that must be intelligible in a difficult room, and an audience that includes senior alumni who notice when a microphone fails. Wedding and walima production is decor-forward with a strong preference for warm lighting and a restrained approach to effects, and qawwali and ghazal sets are common enough that a proper vocal and harmonium reinforcement chain earns its keep.

Specification

LED Screen Rental: technical specification

Typical LED screen rental specification supplied in Aligarh.
Specification	Detail
Typical pitch	P2.6 – P3.9 indoor IMAG, P4.8 – P10 outdoor and delay positions
Legibility rule	On-screen text height at least 1/50th of the furthest viewing distance
Standard formats	16:9 at 1920 x 1080 or 3840 x 2160 native, avoiding non-standard canvases
Delay screen spacing	Additional positions beyond 70 – 80 m of audience depth
Outdoor brightness	5,000 nits minimum for daylight, 7,500 nits in direct sun
Switching	Barco E2/E3, Roland or ATEM with scaling handled once at the switcher
Long-haul signal	Fibre or 12G-SDI to delay positions, never long copper HDMI
Lip-sync handling	Video delayed to match audio arrival at each screen position
Mobile LED	Trailer-mounted 15 – 40 sq m daylight screens, hydraulic deploy in under two hours

The switching layer is what distinguishes a working IMAG setup from a wall with a camera plugged in. A video switcher takes camera inputs, presentation machines, playback and remote feeds, and produces a programme cut plus separate outputs for the screens, the stage confidence monitors and any stream. Scaling is handled once, cleanly, at the switcher rather than panel-side. For outdoor daylight, screens need 5,000 nits or more, and mobile LED trucks are often the fastest way to deliver a large daylight-bright surface on a site with no rigging and a short build window.

Sizing

What size rig does your event actually need?

Scale	Guests	Recommended setup
Seminar room	100 – 300	One 4 m x 2.25 m screen at P2.6, furthest viewer under 20 m
Conference hall	500 – 1,200	6 m x 3.4 m centre plus two 3 m side IMAG screens, four-input switcher
Arena floor	2,000 – 8,000	Two 8 m x 4.5 m side screens at P3.9, flown, four-camera IMAG
Open ground	10,000 – 25,000	Two 10 m main screens at 5,000+ nits plus two delay positions at 80 m and 160 m
Stadium screening	30,000 – 50,000+	Four daylight screens or mobile LED trucks on the bowl perimeter, fibre fed

Scope

LED Screen Rental scope tiers in Aligarh

Single IMAG Screen

Conferences and AGMs up to 800 seats

One 6 m x 3.4 m 16:9 screen at P3.9, ground-stacked
Switcher with two camera inputs and two presentation machines
Confidence monitor feed for the stage
Vision mixer operator and an LED technician
Spare panels, cards and a backup playback machine

Most booked

Side Screen Pair

Large conferences, concerts and award nights, 1,500 – 6,000 guests

Two flanking IMAG screens plus a centre presentation surface
Multi-input switcher with programme, screen and stream outputs
Three to four camera inputs with IMAG cutting
Independent scaling per output so the stage feed stays clean
Vision mixer, LED technician, rigger and a camera liaison

Daylight & Delay Array

Outdoor grounds, sports screenings and mass gatherings, 10,000 – 50,000+

Main daylight-bright screens plus two to four delay positions
Fibre signal distribution with redundancy to each position
Per-position video delay matched to the audio arrival time
Mobile LED trucks where rigging or build time is restricted
Crew per position plus a central vision control

Venues

Where we work in Aligarh

Venue	Capacity	Production note
AMU Kennedy Hall	Around 1,200 seated in the hall, with lawn overflow	A colonial-era university auditorium: a fixed stage, a low grid with no usable rigging capacity, and a reverberant masonry shell that demands a point-source design with delays rather than a large flown system. Every element needs the university's proctorial and engineering office clearance.
Hotel Grand Shivaay	500–900 across hall and lawn	The city's most dependable commercial venue, but it sits on a congested stretch where the police will not permit a truck to stand, so delivery is a timed rotation.
Ramghat Road lawns	800–2,500 across the lawn and marriage-hall belt	The default wedding ground, with rudimentary single-phase or light three-phase connections and no drainage, so a late shower leaves standing water around cable runs and dimmer positions.
AMU Strachey Hall and the Victoria Gate quadrangles	400–1,500 depending on configuration	Protected heritage architecture where fixings are forbidden outright and temporary structures must be ground-supported and kept clear of the facades; load-in routes cross pedestrian campus paths that cannot be blocked during teaching hours.
Tala Nagri industrial exhibition grounds	2,000–6,000 in a trade-fair layout	Industrial estate ground with good truck access and real three-phase capacity nearby, but a dusty unsurfaced site that needs matting for buyer walkways and daily cleaning on everything fan-cooled.

Crew

Who turns up on show day

Vision mixer
Cuts the IMAG programme live from cameras and presentation sources, and protects the stage feed from screen-side changes.
LED technician
Builds and maps each screen, verifies brightness against ambient light and holds spares for every position.
Signal engineer
Runs fibre or SDI to every screen and delay position, proves the paths and sets per-position video delay.
Presentation operator
Receives, versions and cues decks and video, and keeps a mirrored backup machine one slide behind.
Delay position technician
Builds, powers and monitors a remote screen, and holds position in case signal or power drops.

What you receive

Sightline study showing screen sizes against furthest viewer distances
Switcher input and output map with the full signal route
Presentation standards document for every presenter
Per-position video delay sheet matched to audio arrival times
Brightness and colour match record across all screen positions
Programme recording of the IMAG cut as actually shown

Timeline

From enquiry to load-out

T-4 weeks
Sightline study
Furthest-viewer distance and audience spread set screen sizes, positions and whether delay screens are needed.
T-3 weeks
Signal plan
Switcher input list, output map, cable route and fibre requirement drawn for every screen position.
T-2 weeks
Content standards issued
Deck aspect ratio, safe title area, minimum font size and frame rate sent to every presenter and the content team.
Show day −1
Build and signal proving
Screens built, every signal path tested end to end, per-position delay set and brightness matched across positions.
Show day, T-4 hours
Rehearsal
Camera IMAG rehearsed, deck transitions walked through, backup playback machine proved under a live switch.
Show day to +4 hours
Show and strike
Operated live with spares on hand; delay positions struck first because they are furthest from the trucks.

Risk control

What goes wrong, and how we stop it

What can go wrong

How we prevent it

What can go wrong
The backup playback machine is a slide behind when the primary fails during a live cut.
How we prevent it
Mirrored machines are advanced together by the operator and tested with a live failover during rehearsal, not assumed to work.
What can go wrong
Side screens are hung where the stage lighting rig blocks sightlines from the flanks.
How we prevent it
Screen positions are set against the lighting plot and the seating plan together, with a physical sightline walk before panels go up.
What can go wrong
A presenter's deck is 4:3 or uses 12 pt body text and is illegible from row twenty.
How we prevent it
Presentation standards go out at T-2 weeks with aspect ratio, safe area and minimum font size, and we re-format decks on site rather than show something nobody can read.
What can go wrong
IMAG video arrives before the delayed audio at a far position and lip-sync looks broken.
How we prevent it
Each screen position gets its own video delay, measured against the audio arrival time at that exact spot during the build.

Honest comparison

Is this the right choice for your event?

Projection screens instead of LED for IMAG
Our verdict
In a darkened hall with controlled ambient light, projection delivers a larger image per rupee and is perfectly adequate. In any lit room, outdoors, or where a presenter stands near the surface, LED is the only reliable answer.
One large centre screen instead of a side screen pair
Our verdict
A centre screen is cheaper and simpler, and right when the content is a deck. For IMAG it fights the stage for attention and leaves the flanks with poor sightlines — side screens serve a wide audience better.
Adding delay screens versus making the main screens bigger
Our verdict
Bigger main screens help up to a point, then the limiting factor becomes angular size at distance. Past 70 to 80 metres a delay position is cheaper and far more effective than another two metres of main screen width.

Demand

What Aligarh books most

Aligarh event mix

University convocations, Sir Syed Day and academic seminars
Lock and hardware export buyer meets and trade displays
Weddings and walima receptions on the Ramghat Road lawn circuit
Alumni association gatherings and endowment functions
Political rallies and student-body events
School and coaching-sector annual functions

Ideal for

Events we power with LED screen rental in Aligarh

Outdoor events

Sports screenings

Exhibitions

Process

From brief to standing ovation

Brief & recce

We visit the venue, map power and rigging, and understand your show flow.

Design & quote

CAD plans, 3D previews and an itemised quote within 24 hours.

Build & rehearse

Load-in, system tuning, content checks and full technical rehearsal.

Show & strike

Show-caller-led execution, then a quick, clean load-out.

FAQ