Key takeaway
Key takeaways
- T-6 weeks: Rider review
- T-3 weeks: Patch and plot issue
- T-5 days: Prep and pre-build
- Show day −1: Load-in and tuning
How concert sound systems is actually delivered
A concert sound package begins with the artist's technical rider, not with a speaker count. We read the input list, the monitor spec and the backline requirements, then build a patch document that maps every source to a channel on both the front-of-house and monitor consoles. A digital stage box carrying 48 to 96 inputs over a redundant fibre or Cat5e loop feeds both desks, so a failure at one end never silences the other. Where a touring engineer is flying in, we match the console family in the rider — DiGiCo SD or Quantum, Yamaha Rivage PM, Allen & Heath dLive — so their show file loads without a rebuild.
From enquiry to load-out
- T-6 weeks
Rider review
We parse the artist rider line by line and flag every item that needs substitution, approval or import.
- T-3 weeks
Patch and plot issue
Input list, patch sheet, stage plot and monitor send map go to the artist's team for sign-off.
- T-5 days
Prep and pre-build
Consoles are loaded with the show file, racks are tested, and the whole system is powered up in the warehouse.
- Show day −1
Load-in and tuning
Rigging, array flying, power distribution, system alignment and a full line check before the venue closes.
- Show day, T-5 hours
Soundcheck
Band soundcheck, virtual soundcheck capture, SPL logging at mix and boundary positions.
- Show day to +6 hours
Show and strike
Doors to curfew, then de-rig in reverse truck order with rigging signed off before motors move.
Who is on site
- Crew chief
Owns the load-in order, truck sequence, rigging sign-off and the clock against the venue's curfew.
- FOH engineer
Mixes the show, or hosts the visiting engineer and runs the house system while they drive the desk.
- Monitor engineer
Builds and mixes every wedge and IEM send, and manages talkback and artist cues from stage left.
- System engineer
Aligns the PA, measures coverage, sets delay times and keeps amplification and network health on screen.
- Stage patch technician
Patches the input list, labels every line, swaps microphones mid-show and handles changeovers.
- RF technician
Scans spectrum, coordinates microphone and IEM frequencies and watches for dropouts during the show.
What you should receive
Deliverables
- Approved input list and FOH/monitor patch sheet
- Stage plot with backline positions and monitor send map
- SPL log at mix position and nearest noise-sensitive boundary
- Console show file backup on two drives, handed over after strike
- RF frequency plan with coordinated and reserve channels
- Multitrack virtual soundcheck recording of the performance
- Post-show incident and equipment report
What we plan around
What can go wrong
How we prevent it
- What can go wrong
A visiting touring engineer arrives with a show file for a console family nobody booked.
How we prevent itWe confirm the exact desk model and firmware version in writing at T-3 weeks and keep a compatible rental option on standby.
- What can go wrong
Stage wash from guitar cabinets and drum fills bleeds into vocal microphones and kills intelligibility.
How we prevent itBackline is angled off-axis from vocal positions, drum fills are replaced with IEMs for the vocalist, and we hold a perspex drum screen in the truck.
- What can go wrong
Changeover between artists overruns and the headline set is cut short by curfew.
How we prevent itRolling risers with pre-patched looms and a duplicate monitor package, rehearsed as a timed drill at load-in.
- What can go wrong
Power sag when lighting and LED load up mid-show causes amplifier protection trips.
How we prevent itAudio sits on its own phase and its own distribution with a separate earth reference, never shared with dimmer or LED feeds.
The detail that matters
Monitor world is the half of concert audio that clients rarely budget for and artists always judge. We run a dedicated monitor engineer on a separate console with its own splits, a mix of wedges and sidefills for the band and in-ear sends for vocalists and drummers who need isolation from stage wash. Drum fills, bass rigs and guitar cabinets are placed and oriented to keep stage spill out of vocal microphones, because every decibel of bleed we remove on stage is a decibel of clarity we gain at the mix position. Talkback, shout circuits and a wired intercom tie the monitor position, FOH and the stage manager together.
Start the conversation
Get an itemised quote from Prime AV Solutions within 24 hours — call +91 93093 80958 or WhatsApp our producers.
Published 2 September 2026 by the Prime AV Solutions production team.