Can you design to our brand guidelines?

Yes. Our designers build content, lighting palettes and scenic finishes around your brand manual, and share a 3D preview so the stage is approved before anything is fabricated.

How much power should we order for an LED booth wall?

Work from the panel specification rather than a rule of thumb. Indoor panels typically average 150 to 350 watts per square metre with a peak well above that, so a 12 square metre wall plus processing, players and accent lighting commonly needs a 15 to 20 ampere three-phase feed to run comfortably. Order to measured peak plus headroom, because an under-ordered feed is the most expensive saving at an exhibition.

LED wall or large-format screens for a stand?

LED wins for brightness in a daylight-affected hall, for seamless large areas and for non-standard shapes. Screens win for small stands, for close-up detail content and for budget. For anything above roughly 6 square metres of display area, LED is usually both brighter and better value than tiling screens, and it survives being looked at from two feet away less well, which is worth considering for text-heavy content.

Can the stand team run the AV themselves?

Yes, if it is designed for that. Scheduled power-on and shutdown, auto-playing local content, a single remote for source changes and one printed page of instructions will cover almost every situation. What they cannot do is re-map a processor or repatch a failed player, which is why a technician on call in the hall for the show days is normal on anything larger than a single screen.

Why does exhibition build cost more per hour than other events?

Because the window is fixed, shared and short. Thirty-six hours of access, one marshalling yard, queuing lifts and an organiser clearance deadline mean crews work compressed shifts with overtime, and preparation that would be optional elsewhere becomes mandatory here. The kit is often cheaper than a conference rig; the labour, the handling and the organiser-mandated contractor charges are what move the number.

How do we stop our audio annoying the neighbours?

Design for your own stand footprint only. That means near-field or directional speakers aimed down at visitor height, multiple small sources rather than two loud ones, headphone stations for long-form content, and a measured level cap at the stand boundary. Set it during the build with the hall quiet and then re-check once the hall is full, because the noise floor rises and operators creep the level up.

Exhibitions & Trade Shows: Stage, LED and Lighting Design Ideas

Category: Planning Guides
Read time: 7 min
Sections: 3
Updated: Nov 2025

Key takeaway

Standout exhibitions & trade shows design starts from the moment that matters, then builds the stage, screen geometry and lighting around it. Shape the LED rather than defaulting to a flat rectangle, light for skin tone on camera, and protect one clean reveal.

Key takeaways

Design backwards from the moment that matters
Shape the LED instead of a flat rectangle
Light for the camera as well as the room
Protect one clean reveal

Design from the moment outwards

The second problem is the build queue. Hundreds of contractors share one marshalling yard, a handful of hall doors and a window of thirty-six to forty-eight hours, and nobody is waiting for you. The way through it is preparation: numbered and labelled flight cases, a loading list in build order, a booked load-in slot, pre-assembled LED panel sets and a crew briefed to finish early rather than to finish on time. Finishing a day ahead buys you the quiet hours to solve content and alignment problems that are impossible to solve in a crowded hall.

How the design plays out live

Time	Moment	What AV is doing
T−48 hrs	Marshalling and load-in slot	Vehicle reports to the yard against a booked slot; cases unloaded in build order and moved to the stand footprint.
T−36 hrs	Structure and power	Frames and ground support built, metered feed connected by the appointed contractor, distribution split with LED processing on its own circuit.
T−24 hrs	LED and screen build	Panels hung or stacked, processing mapped to the actual pixel canvas, touchscreens and media players installed and cable-managed.
T−12 hrs	Content and brightness set	Attract loops and interactive content loaded locally, aspect ratios checked on the real canvas, brightness set with hall doors open.
T−2 hrs	Handover to the stand team	Scheduled power-on tested, recovery after a simulated trip verified, one-page operating note left with the stand manager.
10:00	Hall opens, day one	Attract loops running, a technician on call across the hall, audio level checked against neighbouring stands and the organiser's limit.
12:30	Keynote stage session	Stage PA and presentation switching live, radio mics on an allocated block clear of other halls, session recorded.
17:00	Hall closes	Scheduled shutdown, screens powered down, overnight security condition noted and content drives secured.

Recommended production stack

LED Screen Rental, LED Wall Rental, Conference AV Setup, Stage Lighting Design. Get an itemised quote from Prime AV Solutions within 24 hours — call +91 93093 80958 or WhatsApp our producers.

Published 28 November 2025 by the Prime AV Solutions production team.

FAQ

Exhibitions & Trade Shows: Stage, LED and Lighting Design Ideas: FAQs

More Planning Guides

How to Plan Event Production: A Producer's Guide Best Event Production Setup for Corporate conferences How to Plan Wedding Lighting Design: A Producer's Guide Best Wedding Lighting Design Setup for Destination weddings How to Plan Concert Sound Systems: A Producer's Guide Best Concert Sound Systems Setup for Concerts How to Plan Line Array Systems: A Producer's Guide Best Line Array Systems Setup for Outdoor concerts