Which Rajkot venues do you work at?

Race Course Ground (Tens of thousands across the central open ground); The Imperial Palace (Several hundred banquet on Dr Yagnik Road); Saurashtra Cricket Stadium (Around 28,000 at Khandheri). Flat and well-connected but entirely without infrastructure, so dust suppression and matting are standing requirements, every kilowatt is generated, and the ground hosts back-to-back fairs that compress the build and strike windows. We also cover hotels, farmhouses and open grounds across Kalawad Road, Race Course, University Road, 150 Feet Ring Road, Mavdi.

What is the difference between an LED wall and an LED screen booking?

An LED wall is scenic: shaped, curved, floor and cube geometry built as part of the stage design, authored to a custom pixel map. An LED screen booking is about visibility — IMAG and delay screens in standard formats so distant audiences can see what is happening. Different panels often, very different design work.

Can LED panels be curved or built into shapes?

Yes. Most current panel families support concave and convex curving at fixed angle increments, corner and cube builds, floor-rated tiles for foot traffic, and transparent mesh for layering over a set. Each geometry changes rigging and power, so the shape needs to be settled before the rigging plan is drawn.

What content format should my studio deliver?

Author to the exact native canvas resolution we issue in the pixel map, at the frame rate of the show, as an image sequence or a high-bitrate ProRes file. Anything authored to a standard HD or 4K frame and then fitted to a non-standard canvas will be scaled, and scaling on LED is immediately visible.

How much power does an LED wall draw?

Roughly 150 to 350 watts per square metre on average content, with peaks well above that on full white. Distribution must be sized for peak rather than average, phases balanced across the grid, otherwise the first full-white frame of your opening title trips a breaker.

Visual · Rajkot, Gujarat

LED Wall Rental in Rajkot

Booking LED wall rental in Rajkot means solving Rajkot's particular problems: Jun–Sep monsoon plus the arabian sea cyclone risk at both edges of that window; Apr–Jun for daytime outdoor work, venue load-in windows, and dates that disappear once the season turns.

WhatsApp a producer

Rated 4.9/5 by 600+ event planners and brands

Lead time: From 5 weeks
Peak season: Oct–Feb
Coverage: Rajkot & Gujarat

Key takeaway

LED Wall Rental in Rajkot is quoted against your guest count, venue and run of show. Value-driven and sharply negotiated — Rajkot buyers are manufacturers who cost things per unit and will ask what a specific line item is for, so an itemised quotation with justified engineering wins where a package price does not. A machinery exhibition build is costed on exactly that logic. Navratri's nine nights run in the Saurashtra raas-garba style, which differs in tempo and choreography from Ahmedabad's. The Janmashtami lok mela on the Race Course is a week-long fair that occupies the ground and the local infrastructure. The distinctive local fact is that Saurashtra communities also marry in the pre-monsoon Vaishakh window in April and May, which most of India does not, so inventory here is contested twice a year rather than once — so we quote within 24 hours and hold dates first-come.

LED Wall Rental for Rajkot’s biggest events

Creative LED is a maths problem before it is a visual one. Pixel pitch sets the minimum comfortable viewing distance — as a working rule, the distance in metres at which the image resolves cleanly is roughly the pitch in millimetres, so a P3.9 panel reads well from about four metres and a P2.6 from under three. We choose pitch from where the nearest audience actually stands and from what the content is: a logo-and-colour backdrop forgives a coarser pitch than live text or a camera that will push in on the surface. The panel grid is then drawn to native resolution so content is authored pixel-for-pixel rather than scaled.

Scenic LED is shaped around the room — ceiling trim, sightlines and the position of the nearest seat decide pitch, geometry and whether the build flies or stacks. In Rajkot that plays out at venues like Race Course Ground, The Imperial Palace, Saurashtra Cricket Stadium, and across Kalawad Road, Race Course, University Road, 150 Feet Ring Road.

Processing decides whether the wall looks like a screen or like a surface. Novastar MCTRL4K and Brompton Tessera SX40 handle large canvases, and the Brompton path adds the tools that matter for cameras: high refresh rates, ShutterSync to lock panel refresh to the camera shutter, and genlock so the wall and the broadcast chain share a clock. Without that, a wall sitting at a low refresh rate will show rolling bands and tearing on every camera cut even though it looks perfect to the eye. Indoor walls typically run 800 to 1,500 nits; outdoor daylight surfaces need 5,000 nits and upwards to hold an image against sun.

What’s included

P1.9 to P4.8 pixel pitch
Curved, corner, floor & ceiling LED
Novastar & Brompton processing
Ground-stack or flown

Equipment we carry

AbsenROE VisualUniluminNovastarBrompton TechnologydisguiseResolumeBarco

Why Rajkot chooses Prime AV

Crews and trucks positioned for fast load-in at The Imperial Palace and venues in Race Course and University Road.
Distribution is sized for peak draw on white content, not average, with phases balanced across the panel grid and content peak-limited where sensible.
Processor configuration record including refresh, ShutterSync and genlock settings
Working knowledge of Gujarat venue rules, power sanctions and permission timelines.

Local conditions

Producing LED wall rental in Rajkot

Weather & the rig

LED panels are the first thing a climate punishes — humidity creeps into ribbon cables, direct sun washes out anything under 5,000 nits, and wind load on a flown wall rises fast with height and surface area. Saurashtra's semi-arid climate brings 42–43°C in May with dry heat and a persistent fine dust that works into every moving fixture and fan intake. The city is far enough inland to escape the worst coastal salt but close enough to the Arabian Sea that the cyclonic systems which have repeatedly tracked along Gujarat's coast in June and October can force a strike call on an outdoor build with under 48 hours of notice. Winter nights settle to 10–12°C, dry and still. Jun–Sep monsoon plus the Arabian Sea cyclone risk at both edges of that window; Apr–Jun for daytime outdoor work.

Power & redundancy

A large LED canvas draws several hundred watts per square metre at peak and spikes on white frames, so distribution is sized to the worst content frame rather than to an average. PGVCL supply in the city is adequate, and the engineering industry base means DG hire, heavy cabling and skilled electrical labour are cheap and abundant — a genuine advantage for a nine-night garba or a week-long machinery exhibition. GPCB requires acoustic enclosures, and the 10pm cut applies outside the state's Navratri notification.

Permits & noise rules

Flown scenic LED needs structural sign-off on point loads, and outdoor builds attract both wind-load scrutiny and, near residential frontage, light-spill objections. Rajkot Municipal Corporation handles ground allotment, temporary structures and the fire NOC, and the Rajkot Police Commissionerate licenses loudspeakers and gatherings, with the state's annual Navratri relaxation being the operative rule on late-night garba. The new Hirasar international airport out on the Ahmedabad highway has shifted the drone restriction footprint away from the city centre, but the old airstrip area and the stadium corridor still need checking rather than assuming.

Load-in & access

Panel cases are heavy, numerous and must arrive in build order, so dock height, lift capacity and the available load-in window set how much surface can realistically go up. Rajkot is the Saurashtra road hub on NH-27 with four hours to Ahmedabad, so trucking in is routine and the 150-ft Ring Road takes any vehicle. The old city around Dharmendra Road, Soni Bazaar and Lohanagar is narrow with handcart-only access during trading hours. The Khandheri stadium run needs its own staging plan because there is no support infrastructure within several kilometres.

Season & booking

Navratri's nine nights run in the Saurashtra raas-garba style, which differs in tempo and choreography from Ahmedabad's. The Janmashtami lok mela on the Race Course is a week-long fair that occupies the ground and the local infrastructure. The distinctive local fact is that Saurashtra communities also marry in the pre-monsoon Vaishakh window in April and May, which most of India does not, so inventory here is contested twice a year rather than once. Peak demand runs Oct–Feb.

Crew & dispatch

Trucked from the Ahmedabad base in about four hours on NH-27, with local DG, cabling and rigging labour sourced in Rajkot, which keeps the mobilisation cost low. Load-in support covers Race Course, University Road and the rest of the city.

What it costs here

Value-driven and sharply negotiated — Rajkot buyers are manufacturers who cost things per unit and will ask what a specific line item is for, so an itemised quotation with justified engineering wins where a package price does not. A machinery exhibition build is costed on exactly that logic.

Local expectations

Saurashtra raas-garba has its own tempo and the band mix sits differently from Ahmedabad's, with the dhol and the singer forward and coverage that must hold across a very large circle. The wedding problem here is scale rather than spectacle: with several thousand guests and a vast dining area, PA intelligibility across the full footprint and the flow of catering drive the design more than the stage look does. Gujarati throughout.

Specification

LED Wall Rental: technical specification

Typical LED wall rental specification supplied in Rajkot.
Specification	Detail
Pixel pitch range	P1.9 – P4.8 indoor, P4.8 – P10 outdoor
Viewing distance rule	Minimum comfortable distance in metres ≈ pixel pitch in mm
Brightness	800 – 1,500 nits indoor, 5,000 – 7,500 nits outdoor daylight
Panel refresh for camera	3,840 Hz or higher, with ShutterSync and genlock on Brompton
Processing	Novastar MCTRL4K / VX1000, Brompton Tessera SX40 with Hydra calibration
Ingress protection	IP43 indoor cabinets, IP65 front and rear for outdoor builds
Power draw	Approximately 150 – 350 W per square metre average, peaks higher on white
Geometry	Flat, curved, corner, cube, floor-rated, transparent mesh and kinetic builds
Rigging	Flown on certified motors with point-load report, or ground-stacked on goalpost frames
Spares carried	Five per cent spare panels plus receiving cards, PSUs and ribbon cables

Creative geometry is where scenic LED earns its budget. Curved and corner builds, suspended cubes, floor tiles rated for foot traffic, transparent mesh over a set and kinetic panels on winches all come from the same panel families but each changes the rigging and the power plan. A flown wall needs a point-load calculation and a wind-load assessment outdoors, because a solid LED surface is effectively a sail and the load rises steeply with height and area. Cable dressing matters too: data and power loop through panels in a defined order, and a single ribbon cable creeping out of its socket in humidity takes out a column.

Sizing

What size rig does your event actually need?

Scale	Guests	Recommended setup
Panel backdrop	100 – 400	6 m x 3 m at P3.9, ground-stacked, single processor, 18 sq m
Stage width wall	400 – 1,500	10 m x 5 m at P2.6 or P3.9, flown, Brompton with ShutterSync, 50 sq m
Wrapped stage design	1,500 – 5,000	Main plus side panels and a floor section, 120 – 180 sq m, media server playback
Immersive room	200 – 800	Three-wall plus floor at P2.6, edge-matched, 250 sq m, calibrated as one canvas
Festival scenic	10,000+	Outdoor IP65 at P4.8 – P6.9, 300 sq m+, wind-load assessed, redundant power

Scope

LED Wall Rental scope tiers in Rajkot

Backdrop Canvas

Conferences and award stages, up to 40 sq m of surface

P2.6 or P3.9 indoor panels on a ground-stacked goalpost
Novastar processing with native-resolution canvas mapping
Content playback with one operator and a hot backup machine
Five per cent spare panels and consumables on site
LED technician plus one rigger for the build

Most booked

Scenic Build

Launches, concerts and award nights, 50 – 180 sq m with shaped geometry

Curved, corner or multi-surface build with flown sections
Brompton processing with ShutterSync and genlock for cameras
disguise or Resolume media server with timecoded playback
Point-load report and certified rigging
Two LED technicians, a media server operator and a rigging crew

Immersive Surface

Large stage designs and immersive rooms, 200 sq m and above

Multi-plane design with floor LED, cubes and kinetic elements
Redundant processing with hot-standby servers and dual data paths
Full panel calibration pass for colour and brightness uniformity
Content pipeline support with pixel maps issued to your studio
Full-time crew across build, show days and strike

Venues

Where we work in Rajkot

Venue	Capacity	Production note
Race Course Ground	Tens of thousands across the central open ground	Flat and well-connected but entirely without infrastructure, so dust suppression and matting are standing requirements, every kilowatt is generated, and the ground hosts back-to-back fairs that compress the build and strike windows.
The Imperial Palace	Several hundred banquet on Dr Yagnik Road	The city's established upscale hotel, reached by a constrained urban service approach, so trucks unload in sequence overnight and kit is broken down to lift dimensions.
Saurashtra Cricket Stadium	Around 28,000 at Khandheri	Fifteen kilometres out on the Jamnagar road with nothing nearby, so a field event needs its own staging yard and welfare provision; full turf protection, ground support only, and SCA plus police clearance.
Hemu Gadhvi Hall	Around 1,000 seated	A civic auditorium with fixed seating and modest house infrastructure, where a show rig brings its own distribution and the municipal booking process sets the build window.
Shri Ram Krishna Ashram grounds	Several thousand on open ground	Community grounds where the trust's own conditions govern what may be built and how late it may run, independent of whatever the municipal permission allows.

Crew

Who turns up on show day

LED technician
Builds the panel grid, maps the canvas to native resolution and chases any dead panel, card or ribbon on sight.
Media server operator
Runs disguise or Resolume, holds the content timeline against timecode and keeps a hot backup machine mirrored.
Rigger
Flies the sections, checks point loads against the report and manages any kinetic or winch elements.
Video engineer
Owns processing, refresh rate, ShutterSync and genlock so the wall behaves correctly on every camera.
Content technician
Conforms incoming content to the pixel map, fixes aspect and colour issues and version-controls what plays.

What you receive

Pixel map with native canvas resolution, aspect ratio and safe areas
Panel grid drawing with data and power loop order
Point-load report and, outdoors, a wind-load assessment
Processor configuration record including refresh, ShutterSync and genlock settings
Brightness and colour calibration report across the surface
Content playlist with timecode cues and a backup on two drives
Spares inventory log and a record of any panel swapped during the run

Timeline

From enquiry to load-out

T-5 weeks
Pitch and geometry decision
Nearest viewing distance, camera plan and content type set the pixel pitch and the panel grid.
T-4 weeks
Pixel map issue
Your content studio receives the exact canvas resolution, aspect and safe areas so nothing is authored to be scaled.
T-2 weeks
Rigging and power sign-off
Point-load report, wind-load assessment for outdoor builds and the power schedule go to the venue.
Show day −2 to −1
Build and calibration
Panels built, data and power looped, canvas mapped, then a brightness and colour calibration pass across the surface.
Show day −1
Camera check
Refresh, ShutterSync and genlock verified live through the actual cameras, with content on screen.
Show day to +6 hours
Show and strike
Operated through the show with spares on hand, then de-rigged panel by panel into cases in build order.

Risk control

What goes wrong, and how we stop it

What can go wrong

How we prevent it

What can go wrong
Average power is calculated from the spec sheet and the breaker trips on a full-white frame.
How we prevent it
Distribution is sized for peak draw on white content, not average, with phases balanced across the panel grid and content peak-limited where sensible.
What can go wrong
The wall looks flawless to the eye but shows rolling bands on every camera.
How we prevent it
Run panels at 3,840 Hz or higher and lock ShutterSync and genlock to the camera chain, then verify through the actual cameras before the show, not at rehearsal.
What can go wrong
Content authored at 1920 x 1080 is stretched onto a non-standard canvas and every logo distorts.
How we prevent it
The pixel map goes to the content studio at T-4 weeks with exact resolution and safe areas, and we conform and review every file before build day.
What can go wrong
Humidity works a ribbon cable loose and a column of panels goes dark mid-show.
How we prevent it
Cables are dressed and strain-relieved at build, connections are reseated after the first full power cycle, and five per cent spare panels and cards are on site.

Honest comparison

Is this the right choice for your event?

A coarser pixel pitch to save budget
Our verdict
Often the right call. If the nearest viewer is eight metres away and the content is graphics rather than text, P4.8 looks identical to P2.6 at a fraction of the cost. It only fails when a camera pushes in.
Ground-stacking instead of flying the wall
Our verdict
Ground stacks are cheaper, faster and avoid a rigging sign-off. The trade-off is a visible frame, a higher bottom edge and lost stage depth, which matters on a set but not behind a lectern.
Buying a small wall outright instead of renting
Our verdict
For a venue or a brand running weekly events, ownership pays back within a year or two. For anything less frequent, rental covers the processing, the spares, the calibration and the crew that a purchased wall quietly needs.

Demand

What Rajkot books most

Rajkot event mix

Engineering and machinery exhibitions
Large community and family weddings
Navratri raas-garba in the Saurashtra style
Dealer and distributor meets for the Saurashtra trade
Lok mela and public fair production
Cricket and sporting events at the stadium

Ideal for

Events we power with LED wall rental in Rajkot

Conferences

Concerts

Award nights

Process

From brief to standing ovation

Brief & recce

We visit the venue, map power and rigging, and understand your show flow.

Design & quote

CAD plans, 3D previews and an itemised quote within 24 hours.

Build & rehearse

Load-in, system tuning, content checks and full technical rehearsal.

Show & strike

Show-caller-led execution, then a quick, clean load-out.

FAQ